Zhigang Wu^1,#, Sicheng Chen^1,#, Jiankun Liang², Lifen Li¹, Xuedong Xi^3,4, Xue Deng¹, Bengang Zhang^3,*, Hong Lei^4,*

Journal of Renewable Materials, Vol.9, No.11, pp. 1959-1972, 2021, DOI:10.32604/jrm.2021.016786

Abstract Alkali lignin was processed by plasma and then used in modification of phenol formaldehyde resin in this study. Chemical structural changes of lignin which was processed by plasma as well as bonding strength, tensile property, curing performance and thermal property of the prepared phenol formaldehyde resin which was modified by the plasma processed lignin were analyzed. Results demonstrated that: (1) Alkali lignin was degraded after the plasma processing. The original groups were destroyed, and the aromatic rings collected abundant free radicals and oxygen-containing functional groups like hydroxyls, carbonyls, carboxyls and acyls were introduced into increase the reaction activity of lignin… More > Graphic Abstract

Kengo Fujii¹, Satoru Yoneyama¹, Ayaka Suzuki², Hiroshi Yamada²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.23, No.1, pp. 21-21, 2021, DOI:10.32604/icces.2021.08538

Abstract This study establishes a method to measure the displacement and strain of rubber with large and fast deformations using digital image correlation. In order to elucidate the mechanism of growth of a crack and to investigate the complex behavior of a crack tip, which is important for that purpose, displacement and strain near the crack where large strains are locally generated by stress concentration are measured. A displacement restraint rubber sheet of a strip fixed at upper and lower ends with an initial crack is used as a test piece. A constant rate displacement load is applied to it, its… More >

Syed Waheedullah Ghori^1,*, G. Srinivasa Rao²

Journal of Renewable Materials, Vol.9, No.7, pp. 1283-1292, 2021, DOI:10.32604/jrm.2021.014987

Abstract Date palm fiber (DPF) and kenaf fiber were reinforced in epoxy having various fiber loading 40%, 50%, and 60% by weight. These hybrid samples were manufactured by hot press technique and then characterized for tensile, impact, and morphological behavior to evaluate the ratio of fibers in the hybrid composites; the addition of kenaf improved the tensile properties, Scanning Electron Microscopy (SEM) revealed the interfacial bonding of fiber/matrix, and dispersion and void content in composites. Impact test studies reflected the effect of natural fiber with epoxy, level of stress transfer from matrix to reinforced material, and reinforced material’s role in absorbing… More > Graphic Abstract

Suxia Li^1,2, Haiyang Zhang^1,*, Biqing Shu^1,3, Liangsong Cheng¹, Zehui Ju¹, Xiaoning Lu^1,*

Journal of Renewable Materials, Vol.9, No.7, pp. 1225-1237, 2021, DOI:10.32604/jrm.2021.014364

Abstract The wood friction welding technique with its high bonding strength, low cost, high efficiency, and without any adhesive has been increasing concern in China. Moso bamboo (Phyllostachys pubescens) and poplar (Populus sp.) are widely planted and used in the furniture industry, interior decoration, and wood structure construction in China. The aim of this work was to investigate the bonding performance of moso bamboo dowel rotation welded joints with different dowel/receiving hole diameter ratios. The results indicated that the ratio of dowel/receiving hole diameter was an important parameter that influenced the welding performance. The bonding strength of the bamboo-to-poplar welded joints… More >

Zhihang Wang^1,*, Jinyu Xu^1,2, Xin Meng¹, Conigjin Zhu¹

Journal of Renewable Materials, Vol.9, No.6, pp. 1157-1168, 2021, DOI:10.32604/jrm.2021.014878

Abstract In this paper, the specimens of polymer-cement composites after 1 d, 7 d, 15 d, and 30 d aging without aging and UV aging are subjected to fixed extension test and tensile test. By observing the mode of the composite in the fixed-elongation test, and measuring the elastic recovery rate, tensile strength, elongation at break, peak tensile strain, tensile toughness and pre-peak tensile toughness of the composite, the effects of UV aging on the bonding and the tensile properties of the composite were studied. And combining with scanning electron microscopy experiments, the micro-mechanism of the effect of ultraviolet aging on… More >

Yinhuan Yang^1,*, Manfeng Gong¹, Xiaoqun Xia¹, Yuling Tang²

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.3, pp. 1239-1249, 2021, DOI:10.32604/cmes.2021.014129

Abstract In order to study the mechanical properties of Z-pins reinforced laminated composite single-lap adhesively bonded joint under un-directional static tensile load, damage failure analysis of the joint was carried out by means of test and numerical simulation. The failure mode and mechanism of the joint were analyzed by tensile failure experiments. According to the experimental results, the joint exhibits mixed failure, and the ultimate failure is Z-pins pulling out of the adherend. In order to study the failure mechanism of the joint, the finite element method is used to predict the failure strength. The numerical results are in good agreement… More >

Ruixue Wu¹, Tiejun Zhao¹, Peng Zhang¹, Dingyi Yang², Miao Liu², Zhiming Ma^2,*

Journal of Renewable Materials, Vol.9, No.4, pp. 743-765, 2021, DOI:10.32604/jrm.2021.013669

Abstract

This work investigates the feasibility of utilizing reactive recycled powder (RP) from construction and demolition (C&D) waste as supplementary cementitious material (SCM) to achieve a ductile strain hardening cementitious composites (SHCC). The recycled mortar powder (RMP) from mortar waste, recycled concrete powder (RCP) from concrete waste and recycled brick powder (RBP) from clay brick waste were first prepared, and the micro-properties and tensile behavior of SHCC containing various types and replacement ratios of RPs were determined. The incorporated RP promotes pozzolanic and filler effects, while the hydration products in cementitious materials decrease with RP incorporation; therefore, the incorporated RP decreases… More >

Sami Allagui^1,2,*, Abderrahim El Mahi¹, Jean-Luc Rebiere¹, Moez Beyaoui², Anas Bouguecha², Mohamed Haddar²

Journal of Renewable Materials, Vol.9, No.4, pp. 695-721, 2021, DOI:10.32604/jrm.2021.013586

Abstract This manuscript deals with the effects of recycling on the static and dynamic properties of flax fibers reinforced thermoplastic composites. The corresponding thermoplastic used in this work is Elium resin. It’s the first liquid thermoplastic resin that allows the production of recycled composite parts with promising mechanical behavior. It appeared on the resin market in 2014. But until now, no studies were available concerning how it can be recycled and reused. For this study, a thermocompression recycling process was investigated and applied to Elium resin. Flax fiber-reinforced Elium composites were produced using a resin infusion process and were subjected to… More >

O. S. Dahham¹, N. Z. Noriman^1,2,*, H. Jaya¹, R. Hamzah¹, M. U. Umar^2,3, I. Johari⁴

Journal of Renewable Materials, Vol.8, No.12, pp. 1633-1645, 2020, DOI:10.32604/jrm.2020.011377

Abstract In this work, Epoxidized natural rubber/sawdust short fiber (ENR-50/ SD) composites at different fiber content (5, 10, 15 and 20 phr) and size (fine size at 60–100 μm and coarse size at 10–20 mm) were prepared using two-roll mill and electrical-hydraulic hot press machine respectively. Curing characteristics, water uptake, tensile, morphological, physical, and thermal properties of the composites were investigated. Results indicated that the scorch time and cure time became shorter whereas torque improved as SD content increase. Though the decline of tensile strength and elongation at break values, modulus, hardness and crosslinking density have shown enhancements with the increasing… More >

Liang Jia, Chunxiang Li, Jian Guo^*

Journal of Renewable Materials, Vol.8, No.10, pp. 1357-1373, 2020, DOI:10.32604/jrm.2020.012136

Abstract Lime-fly ash stabilized loess has a poor early strength, which results in a later traffic opening time when it is used as road-base materials. Consideration of the significant early strength characteristics of sulphate aluminum cement (SAC), it is always added into the lime-fly ash mixtures to improve the early strength of stabilized loess. However, there is a scarcity of research on the mechanical behavior of lime-fly ash-SAC stabilized loess and there is a lack of quantitative evaluation of loess stabilized with binder materials. This research explored the effects of the amount of binder materials, curing time and porosity on the… More >