Ja-Ryong Koo¹, Hye Min Park¹, Se Kyung Kim², Hyun Shik Yun^1,*

Journal of Renewable Materials, Vol.7, No.4, pp. 365-372, 2019, DOI:10.32604/jrm.2019.04170

Abstract Lactic acid is an important organic acid that is widely used in the food, pharmaceutical, and cosmetic industries. Lactic acid was produced from coffee ground waste which contains fermentable sugars and is increasingly generated from our daily dietary life. Among 114 strains of Lactobacillus species, Lactobacillus rhamnosus ATCC 10863 was selected for the production of lactic acid from coffee ground waste. Through alkali pretreatment and saccharification, cellulose and hemicellulose in coffee ground waste were converted into fermentable sugars. Pretreatment experiments were conducted at various alkali solution, concentrations, and times. Alkali pretreatment with 35 g/L of KOH at 121oC for 60… More >

María G. Passaretti^1,2,*, Mario D. Ninago^3,4, Cecilia I. Paulo⁵, Horacio A. Petit⁵, Edgardo F. Irassarc⁵, Daniel A. Vega⁶, Marcelo A. Villar^1,2, Olivia V. López¹

Journal of Renewable Materials, Vol.7, No.4, pp. 393-402, 2019, DOI:10.32604/jrm.2019.04281

Abstract Granite stone is a by-product of the rock crushing manufacturing. An industrial waste in powder form that causes health problems and environmental pollution. Fine particles fraction can be used as a partial replacement of sand in concrete manufacture. In this work, an alternative exploitation of this waste fraction is proposed. Granite sand (GS) with particles mean size of ~1 μm was employed as thermoplastic starch (TPS) filler at different concentrations. Biocomposites were obtained by melt-mixing and thermo-compression, achieving translucent and easy to handle films. A good GS dispersion within the matrix was evidenced by SEM. Mineral presence induced a shift… More >

F. ZHANG, S. ZHANG, Y. L. XIONG, H. NAKANO, T. NISHIMURA

The International Conference on Computational & Experimental Engineering and Sciences, Vol.17, No.2, pp. 61-62, 2011, DOI:10.3970/icces.2011.017.061

Abstract In deep geological disposal for high-level radioactive waste (HLW), one of the most important factors is to study the thermo-hydraulic-mechanical (THM) behavior of natural barrier that consists of host rock, most made from sedimentary rock or granite. In this paper, based on a new simple thermo-elasto-viscoplastic model of soft rock proposed by Zhang & Zhang (2009), a program of finite element method (FEM) has been developed to simulate the above-mentioned THM behavior of geological disposal. 2D and 3D analyses are conducted to estimate long-term stability of the host rock. The men-made barrier, usually composed of buffer material of bentonite, metal… More >

Antonio Greco*, Francesca Ferrari, Raffaella Striani, Carola Esposito Corcione

Journal of Renewable Materials, Vol.7, No.10, pp. 1023-1035, 2019, DOI:10.32604/jrm.2019.07778

Abstract This work is aimed at the development of new green composite materials through the incorporation of the solid organic waste (SOW) in a thermoplastic matrix. After being ground, the organic waste was exposed to a sterilization process, though an autoclave cycle, in order to obtain a complete removal of the bacterial activity. The SOW was found to have a high amount of water, about 65-70%, which made uneconomical its further treatment to reduce the water amount. Therefore, a water soluble polymer, poly (vinyl alcohol) (PVA) was chosen in order to produce SOW based blends. However, in order to reduce the… More >

Malinda Syifa Yusharani, Stenley, Harmami, Ita Ulfin, Suprapto Suprapto, Yatim Lailun Ni’mah*

Journal of Renewable Materials, Vol.7, No.7, pp. 643-653, 2019, DOI:10.32604/jrm.2019.04185

Abstract Water-Soluble Chitosan (WSC) has been sucessfuly synthesized from squid pens waste. The synthesis of chitosan from chitin was carried out by optimization of deacetylation temperature and time. Chitin was obtained from squid pens waste by demineralization and deproteinization process. HCl 7% was used for demineralization and NaOH 10% at 60°C was applied for deproteinization process. Deacetylation reaction was carried out at varied temperatures i.e., 60°C, 70°C, 80°C, 90°C and 100°C in NaOH 50% solution for 10 hours. Deacetylation reaction time were varied for 2 hours, 4 hours, 6 hours, 8 hours, and 10 hours. The crude chitosan obtained then reacted… More >

Juan Carlos Torres Lozada*

Journal of Renewable Materials, Vol.7, No.6, pp. 523-525, 2019, DOI:10.32604/jrm.2019.04053

Abstract This paper presents the patent of a new additive for the construction industry, which is obtained from the biomass residues of the wood industry. This additive is biodegradable and has fluidifying, foaming, plasticizing and stabilizing properties. When the additive is mixed with cement binder compositions, cement mortar and concrete, lightweight, flame-retardant cellular materials, thermal and acoustic insulators are obtained. More >

Murat Kaya^1,*, Idris Sargin¹, Povilas Mulerčikas², Jalel Labidi³, Asier M. Salaberria³, Yavuz S. Cakmak¹, Sonata Kazlauskaitė², Demet Erdonmez⁴, Vykintas Baublys⁵

Journal of Renewable Materials, Vol.7, No.3, pp. 215-226, 2019, DOI:10.32604/jrm.2019.00002

Abstract Hylobius abietis is a plant parasitic insect belonging to the order Coleoptera and which causes severe damages to coniferous forests in Northern and Eastern Europe. This current study is aimed to provide a new viewpoint into the waste of this insect by producing chitosan. Dry insect corpses consisted of 27.9% chitin and 86.2% of the chitin was converted into the chitosan. FT-IR spectra analyses confirmed the purity and the deacetylation degree of the produced chitosan (molecular weight of chitosan; 7.3 kDa). This chitosan exhibited antimicrobial activity against 18 bacterial strains. Further, biodegradable chitosan composite films with β-carotene were produced. Antioxidant… More >

Nívia do Nascimento Marques¹, Caroline Suzy do Nascimento Garcia¹, Liszt Yeltsin Coutinho Madruga¹, Marcos Antônio Villetti², Men de SáMoreira de Souza Filho³, Edson Noriyuki Ito⁴, Rosangela de Carvalho Balaban^1,*

Journal of Renewable Materials, Vol.7, No.2, pp. 139-152, 2019, DOI:10.32604/jrm.2019.00040

Abstract After industrial mango processing, tons of residues such as peels and kernels are discarded as waste. Nevertheless, almost 60% of the mango kernel is due to starch on a dry weight basis. Herein, starch from mango (Manguifera Indica L.) kernel was applied to obtain a starch fatty ester with vinyl laurate, in DMSO, under basic catalysis. FTIR, 1H and 13C NMR confirmed that a starch ester with a degree of modification of 2.6 was produced. TGA showed that the modified starch has higher thermal stability than its precursors and higher than a vinyl laurate/starch physical blend. SEM data showed that… More >

Kaoutar Kara^1,*, Fatiha Ouanji², El Mostapha LOTFI¹, Mohammed El Mahi¹, Mohamed Kacimi²

Journal of Renewable Materials, Vol.7, No.1, pp. 1-7, 2019, DOI:10.32604/jrm.2019.00016

Abstract A tricalcium phosphate (TCP) material was produced from sardine and mackerel waste using a heat treatment method after a Soxhlet extraction to obtain the non-soluble portion of fish waste. The bones were annealed at temperatures between 400°C and 1200°C. The thermal analysis (TG-DTA) was carried out to investigate the thermal stability of TCP and to confirm the removal of organic matter from the raw fish. The calcined bones were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM). The calcium to phosphorous weight ratio was determined by ICP- AES. FT-IR and XRD… More >

Hynek Beneš, Aleksandra Paruzel*, Jiří Hodan and Olga Trhlíková

Journal of Renewable Materials, Vol.6, No.7, pp. 697-706, 2018, DOI:10.32604/JRM.2018.00011

Abstract In this study, castor oil, rapeseed oil and medium chain triglycerides of coconut oil, were transesterified by means of 2-ethyl-2-hydroxymethyl-1,3-propanediol (trimethylolpropane) and consequently used to convert polycarbonate waste from end-of-life vehicles into liquid polyols. The prepared recycled polyols, composed uniquely of renewable and recycled components, had a hydroxyl number of ca. 250 mg KOH·g−1. They were successfully applied as 100% replacement of a virgin polyol for preparation of solid crosslinked polyurethanes (PU) by solvent-free casting. The produced rigid cast PU exhibited the main transition temperature ranging from 44°C to 53°C, the hardness value from 46 to 61 Shore D and… More >