Jianhua Lyu^1,2,#, Jialei Wang^1,2,#, Ziqiang Chen³, Ming Chen^1,2,*

Journal of Renewable Materials, Vol.11, No.1, pp. 309-319, 2023, DOI:10.32604/jrm.2022.021478

Abstract The traditional tenon and mortise joint has low processing efficiency and a weak theoretical basis, making the structure easy to deform and damage, reducing the safety, and increasing waste of resources. This study aims to determine the optimum dowel center spacing parameter for chamfered-joint components and the maximum value of the strength of joints loaded into bending strength and tensile strength. In this study, an integrated optimization method combining the single-factor test and one-way ANOVA analysis was proposed to study the influence of the dowel center spacing on the bending strength and the tensile strength of chamfered-joint components made by… More >

Long Li, Yanan Lu, Yu Chen, Jiayi Bian, Li Wang, Li Li^*

Journal of Renewable Materials, Vol.11, No.1, pp. 291-307, 2023, DOI:10.32604/jrm.2022.021456

Abstract Silver nanoparticles (Ag NPs) are an effective antibacterial agent, but their application in food packaging is limited due to their easy agglomeration and oxidation. In this study, antibacterial microcapsules were fabricated using Ginkgo biloba essential oil (GBEO) as core material and chitosan and type B gelatin biopolymer as capsule materials. These antibacterial microcapsules were then modified with green-synthesized Ag NPs, blended into the biopolymer polylactic acid (PLA), and finally formed as films. Physicochemical properties and antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were evaluated. Results showed that the prepared antibacterial PLA films exhibited excellent antibacterial… More > Graphic Abstract

Samsul Bhakri¹, Muhammad Ghozali^2,*, Edy Cahyono¹, Evi Triwulandari², Witta Kartika Restu², Nissa Nurfajrin Solihat³, Apri Heri Iswanto^4,5, Petar Antov⁶, Viktor Savov⁶, Lee Seng Hua⁷, Erika Ayu Agustiany⁸, Lubos Kristak⁹, Widya Fatriasari^3,*

Journal of Renewable Materials, Vol.11, No.1, pp. 41-59, 2023, DOI:10.32604/jrm.2022.023151

Abstract The aim of this research work was to evaluate the potential of using renewable natural feedstock, i.e., Jatropha curcas oil (JCO) for the synthesis of non-isocyanate polyurethane (NIPU) resin for wood composite applications. Commercial polyurethane (PU) is synthesized through a polycondensation reaction between isocyanate and polyol. However, utilizing toxic and unsustainable isocyanates for obtaining PU could contribute to negative impacts on the environment and human health. Therefore, the development of PU from eco-friendly and sustainable resources without the isocyanate route is required. In this work, tetra-n-butyl ammonium bromide was used as the activator to open the epoxy ring with 3-Aminopropyltriethoxisylane… More > Graphic Abstract

Antonio Pizzi^*

Journal of Renewable Materials, Vol.11, No.1, pp. 1-25, 2023, DOI:10.32604/jrm.2022.023314

Abstract Soy flour (SF), soy protein and soy protein isolates (SPI) have been the focus of increasing research on their application as new materials for a variety of applications, mainly for wood adhesives and other resins. Tannins too have been the focus of increasing research for similar applications. While both materials are classed as non-toxic and have achieved interesting results the majority of the numerous and rather inventive approaches have still relied on some sort of hardeners or cross-linkers to bring either of them or even their combination to achieve acceptable results. The paper after a presentation of the two materials… More >

Elham Azadeh¹, Xinyi Chen², Antonio Pizzi^2,*, Christine Gérardin¹, Philip Gérardin¹, Hisham Essawy³

Journal of Renewable Materials, Vol.10, No.12, pp. 3217-3227, 2022, DOI:10.32604/jrm.2022.022740

Abstract Non-isocyanate polyurethane (NIPU) foams using a hydrolysable tannin, also vulgarly called tannic acid, namely here commercial chestnut wood tannin extract was prepared. Compression strength did not appear to depend on the foam apparent density while the formulation composition of the NIPU foams has been shown to be more determinant. These NIPU foams appeared to be self-extinguishing once the high temperature flame is removed. The ignition time gave encouraging results but for improved fire resistance the foams may need some fire-retardant addition. FTIR spectrometry showed the formation of non-isocyanate urethane linkages. Thermogravimetric analysis indicated a good thermal resistance of these foams,… More >

Nora Elizondo-Villarreal^1,*, Luz H. Verástegui-Dominguez¹, Jose J. Quijano-Briones¹, Francisco J. Vázquez-Rodríguez², Eden Rodríguez-Castellanos³, Enrique López-Cuellar³, Ernesto Torres-Lopez¹, Victor M. Castaño-Meneses^4,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3559-3572, 2022, DOI:10.32604/jrm.2022.021945

Abstract

Agave salmiana ash and poultry eggshell powder as CaO sources were used for obtaining nanostructured hydroxyapatite (HAP). The synthesis was carried out by the Green Chemistry Hydrothermal Biosynthesis at 180°C with a pH of 5, by reacting CaO from Agave Salmiana ash and Eggshell powder, with dibasic calcium phosphate (CaHPO₄•2H₂O) in an aqueous solution, with Aloe barbadensis extract. The product was characterized by X-ray diffraction, Fourier-transform infrared spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The size and shape of the hydroxyapatite particles changed dramatically in the presence of Aloe barbadensis. Large crystals of Hydroxyapatite were observed… More > Graphic Abstract

Lujiang Xu, Geliang Xie, Xianjun Zhou, Yucheng Liu, Zhen Fang^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3107-3118, 2022, DOI:10.32604/jrm.2022.020691

Abstract In this paper, CaO/bio-char was synthesized by directly co-pyrolysis of Ca(OH)₂ and rice straw, and used as catalyst to catalytic pyrolysis of soybean oil to produce high quality biofuel. In this co-pyrolysis process, CaO particles has been successfully embedded on the bio-char surface. During the catalytic pyrolysis process, CaO/bio-char showed a good catalytic performance on the deoxygenation of soybean oil. Pyrolysis temperature affected the pyrolysis reactions and pyrolytic products distributions dramatically, higher pyrolysis temperature lead to seriously cracking reactions, lower bio-oil yield and higher gases yield, and lower pyrolysis temperature lead to higher bio-oil yield with higher oxygenated compounds content… More > Graphic Abstract

Sumari Sumari^*, Mega Murti, Aman Santoso, Muhammad Roy Asrori

Journal of Renewable Materials, Vol.10, No.12, pp. 3659-3670, 2022, DOI:10.32604/jrm.2022.022995

Abstract Kapok seed oil is an environmentally friendly biodiesel feedstock. The problem of the best catalyst for transesterification of Kapok seed oil still continues today. The research developed a base-heterogeneous catalyst with the effect of ultrasonic waves during transesterification. So, the study aims: (1) to determine the type of natural zeolite used, (2) to determine the characteristics of the synthesized CaO:BaO/ANZ catalyst, and (3) to determine the effectiveness of the CaO:BaO/ANZ catalyst in the biodiesel production process through sono-transesterification of kapok seed oil. The research stages consisted of: (1) activation of natural zeolite and its characterization, (2) preparation of CaO:BaO/ANZ catalyst,… More > Graphic Abstract

Usama Sayed^1,2, Assima Dauletbek^1,2, Xue Xin^1,2, Rodolfo Lorenzo³, Haitao Li^1,2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3629-3657, 2022, DOI:10.32604/jrm.2022.022624

Abstract In light of the increasing demand for sustainable building materials, the effectiveness of bamboo utilization in various fields has become the object of scientists’ close attention. The increased interest in bamboo is explained by its sustainable characteristics, which make it the most preferred material for environmentally friendly and costeffective construction compared to conventional ones. Applicability of bamboo is vast and diverse: from decoration and furniture to structural members and reinforcement. Due to the low price, rich resources, and high elasticity, bamboo culms have also been used as an alternative to steel reinforcement in concrete structures. Extensive research has been done… More >

Mahdi Hosseini^1,2,*, Bingyu Jian^1,2, Haitao Li^1,2,*, Dong Yang^1,2, Ziang Wang^1,2, Zixian Feng^1,2, Feng Shen³, Jian Zhang⁴, Rodolfo Lorenzo⁵, Ileana Corbi⁶, Ottavia Corbi⁶

Journal of Renewable Materials, Vol.10, No.12, pp. 3243-3262, 2022, DOI:10.32604/jrm.2022.022171

Abstract The use of fibre-reinforced polymer (FRP) to confine concrete columns improves the strength and ductility of the columns by reducing passive lateral confinement pressure. Many numerical and analytical formulations have been proposed in the literature to describe the compressive behaviour of FRP confined concrete under both monotonic and cyclic loads. However, the effect of a stress/strain level in the columns has not been well defined because of the lack of well-defined strategies of modelling and oversimplification of the model. This paper reviews the existing FRP combinations and the available numerical and analytical methods to determine the effectiveness of the adopted… More >