Yalin Li^1,*, Lei Liu¹, Wenbao Huang¹, Junpu Xie², Zhaoxia Song¹, Shuna Guo¹, Enci Wang¹

Journal of Renewable Materials, Vol.11, No.7, pp. 3001-3023, 2023, DOI:10.32604/jrm.2023.026604

Abstract To achieve optimal recovery and value-added utilisation of cellulose in peanut shells, the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method. Then, cellulose hydrogel was prepared by graft copolymerisation using N, N’-methylenebisacrylamide as the cross-linking agent, sodium persulfate as the initiator, and acrylic acid as the monomer. Orthogonal optimisation experiments were designed to obtain optimal process parameters for hydrogel preparation with the cellulose dosage of 0.40 g, initiator dosage of 0.20 g, polymerisation temperature of 70°C, cross-linking agent of 0.25 g, and monomer dosage of 3.0 mL. The effect of initiator dosage on hydrogel synthesis was… More > Graphic Abstract

Liang Yu^1,2,3, Yuan Liu^1,2,3, Xiuling Cao^4,*, Yulong Yan^1,2,3, Chen Zhang^1,2,3, Yanli Jiang^1,2,3,*

Journal of Renewable Materials, Vol.11, No.7, pp. 3057-3072, 2023, DOI:10.32604/jrm.2023.025732

Abstract In this study, the effect of sintering temperature and the addition of kaolin, a sintering agent, on the microscopic, phase, and mechanical properties of ceramics were investigated using secondary aluminum dross (SAD) as the main component in the manufacturing of ceramics. The basic phases of the ceramics were Al₂O₃, MgAl₂O₄, NaAl₁₁O₁₇, and SiO₂ without the addition of kaolin. The diffraction peaks of MgAl₂O₄, NaAl₁₁O₁₇, and SiO₂ kept decreasing while those of Al₂O₃ kept increasing with an increase in temperature. In addition, the increase in temperature promoted the growth of the grains. The grains were uniform in size and regular in… More > Graphic Abstract

Yu Bai, Lei Wang, Ying Fang^*

Journal of Renewable Materials, Vol.11, No.7, pp. 3129-3141, 2023, DOI:10.32604/jrm.2023.026923

Abstract Energy shortage and the emission of greenhouse gases have become a global problem of urgent concern. Therefore, there is an urgent need to develop a low carbon building material. Geopolymers have become a hot topic due to their environmental sustainability and the feasibility of immobilizing industrial waste. In this paper, steel slag (SS) fines were investigated as auxiliary materials of blast furnace slag (BFS) based geopolymer. The hydration heat properties, flowability, compressive strength, sorptivity coefficient, X-ray diffraction (XRD), and scanning electron microscopy (SEM) of the geopolymer pastes were determined. The results showed that the incorporation of SS weakened the reactivity… More >

Yongde Luo, Jiang Jin^*, Hua Zhang^*

Journal of Renewable Materials, Vol.11, No.7, pp. 3143-3153, 2023, DOI:10.32604/jrm.2023.027396

Abstract A hybrid system combined with a non-contact membrane and bubbling absorption is proposed to capture CO₂ from flue gas. The non-contact way of membrane and liquid absorbent effectively avoids the reduction of gas diffusion flux through the membrane. High-porosity ceramic membranes in hybrid systems are used for gas-solid separation in fuel gas treatment. Due to the high content of H₂O and cement dust in the flue gas of the cement plant, the membrane is hydrophobically modified by polytetrafluoroethylene (PTFE) to improve its anti-water, anti-fouling, and self-cleaning performances. The results show that the diffusion flux of CO₂ through the membrane is… More >

Mochamad Chalid^1,*, Gifrandy Gustiraharjo¹, Azizah Intan Pangesty¹, Alyssa Adyandra¹, Yudan Whulanza², Sugeng Supriadi²

Journal of Renewable Materials, Vol.11, No.7, pp. 3043-3056, 2023, DOI:10.32604/jrm.2023.026788

Abstract Polyethylene glycol (PEG) was added at different concentrations to the blend of poly(L-lactic acid) (PLLA) and poly(D,L-lactic acid)(PDLLA) to tailor the properties. The differential scanning calorimetry (DSC) measurement showed that all blends were miscible due to shifting a single glass transition temperature into a lower temperature for increasing PEG content. The DSC, FTIR, and XRD results implied the crystallinity enhancement for PEG content until 8 wt%, then decreased at 12 wt% PEG. The XRD result indicated the homo crystalline phase formation in all blends and no stereocomplex crystal. The in vitro degradation study indicated that PEG content is proportional to… More > Graphic Abstract

Wenqi Zhao¹, Wenbin Sun^1,2,3,*, Zhenbo Cao¹, Jianbang Hao¹

Journal of Renewable Materials, Vol.11, No.7, pp. 3073-3089, 2023, DOI:10.32604/jrm.2023.026409

Abstract Mine grouting reinforcement and water plugging projects often require large amounts of grouting materials. To reduce the carbon emission of grouting material production, improve the utilization of solid waste from mining enterprises, and meet the needs of mine reinforcement and seepage control, a double-liquid grouting material containing a high admixture of coal gangue powder/bottom ash geopolymer was studied. The setting time, fluidity, bleeding rate, and mechanical properties of grouting materials were studied through laboratory tests, and SEM analyzed the microstructure of the materials. The results show that the total mixture of calcined gangue does not exceed 60%. And the proportion… More >

Na Yao¹, Haiyang Ding^1,2,*, Mei Li¹, Shouhai Li^1,2, Lina Xu¹, Xiaohua Yang¹

Journal of Renewable Materials, Vol.11, No.7, pp. 3115-3128, 2023, DOI:10.32604/jrm.2023.026823

Abstract It is of considerable significance to develop efficient and environmentally friendly machinery lubricant additives because of the increasing depletion of petrochemical resources and severe environmental problems. Herein, we proposed a facile strategy to synthesize a multifunctional vegetable oil-based lubricant via the lignin derivative vanillin coupled to amine and diethyl phosphite to produce a lubricating additive with both extreme pressure and antioxidant properties. Compared with pure tung oil, the lubricating and antioxidant performance of tung oil is significantly improved after adding additives. Adding the 1.0 wt% additive to the tung oil reduced the friction wear coefficient and the volume, and the… More > Graphic Abstract

Huiling Fu¹, Mijun Peng², Qiuwen Tang², Haojun Liang², Yanli Liang², Jiali Fang^2,*, Xuesong Wang^2,*

Journal of Renewable Materials, Vol.11, No.7, pp. 3091-3114, 2023, DOI:10.32604/jrm.2023.026689

Abstract To ensure the export quality of Eucommia ulmoides leaf extract (ELE) and facilitate E. ulmoides leaf inclusion in the directory of traditional Chinese health foods, an overall safety assessment of ELE was performed, including genotoxicity and long-term toxicity, according to the national food safety standards of China. No variations in the reverse mutation number of the nominal bacterial strains were observed under ELE treatment in comparison with the solvent control. Additionally, the micronucleus rates of in vivo mammalian erythrocytes and in vitro mammalian cells under ELE treatment were equivalent to or significantly lower than those of the solvent control. The… More > Graphic Abstract

Medta Boupan^1,2, Kanyapak Prompang¹, Achiraya Chompunuch¹, Piwat Boonma¹, Arthit Neramittagapong^1,2,3,4, Somnuk Theerakulpisut⁵, Sutasinee Neramittagapong^1,2,3,*

Journal of Renewable Materials, Vol.11, No.7, pp. 2985-3000, 2023, DOI:10.32604/jrm.2023.026397

Abstract Isosorbide is a multi-purpose chemical that can be produced from renewable resources. Specifically, it has been investigated as a replacement for toxic bisphenol A (BPA) in the production of polycarbonate (PC). In this study, the synthesis of isosorbide by sorbitol dehydration using a cerium-based catalyst derived from calcined cerium (IV) sulfate (300°C, 400°C, 450°C, 500°C, and 650°C) was investigated. The reaction occurred in a high-pressure reactor containing nitrogen gas. Advanced instrumental techniques were applied to analyze the characteristics of the calcined catalyst. The results showed that the calcined catalysts demonstrated different crystalline structures and sulfate species at different temperatures. However,… More > Graphic Abstract

Shang Zhang¹, Jie Wang², Benjamin Rose⁵, Yushan Yang³, Qingfeng Ding¹, Bengang Zhang^4,*, Chunlei Dong^2,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2881-2891, 2023, DOI:10.32604/jrm.2023.028160

Abstract To study the static bending creep properties of glass fiber reinforced wood, glass fiber reinforced poplar (GFRP) specimens were obtained by pasting glass fiber on the upper and lower surfaces of Poplar (Populus euramevicana, P), the performance of Normal Creep (NC) and Mechanical Sorptive Creep (MSC) of GFRP and their influencing factors were tested and analyzed. The test results and analysis show that: (1) The MOE and MOR of Poplar were increased by 17.06% and 10.00% respectively by the glass fiber surface reinforced composite. (2) The surface reinforced P with glass fiber cloth only exhibits the NC pattern of wood… More >