Xiaorui Zhang^1,2,*, Jiali Duan¹, Wei Sun², Tong Xu¹, Sunil Kumar Jha³

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 117-133, 2021, DOI:10.32604/cmes.2021.012034

Abstract The cutting simulation of soft tissue is important in virtual surgery. It includes three major challenges in computation: Soft tissue simulation, collision detection, and handling, as well as soft tissue models. In order to address the earlier challenges, we propose a virtual cutting system based on the mass-spring model. In this system, MSM is utilized to simulate the soft tissue model. Residual stress is introduced to the model for simulating the shrinking effect of soft tissue in cutting. Second, a cylinder-based collision detection method is used to supervise the collision between surgical tools and soft tissue. Third, we simulate the… More >

Chunlei Zhang^1,2,3,*, Y. P. Chugh², Ruimin Feng⁴, Yong Zhang⁵, Wei Shen¹, Jingke Wu¹, Yushun Yang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 135-157, 2021, DOI:10.32604/cmes.2021.014665

Abstract Extraction of a protective coal seam (PVCS)-below or above a coal seam to be mined with the potential of coal and gas outburst risk-plays an important role not only in decreasing the stress field in the surrounding rock mass but also in increasing the gas desorption capacity and gas flow permeability in the protected coal seam (PTCS). The PVCS is mined to guarantee the safe mining of the PTCS. This study has numerically evaluated the stress redistribution effects using FLAC3D model for a longwall face in Shanxi Province. The effects of mining depth, mining height and inter-burden rock mass properties… More >

Mohammed Lafi^1,*, Bilal Hawashin², Shadi AlZu’ bi³

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 99-116, 2021, DOI:10.32604/cmes.2021.013026

Abstract Most software systems have different stakeholders with a variety of concerns. The process of collecting requirements from a large number of stakeholders is vital but challenging. We propose an efficient, automatic approach to collecting requirements from different stakeholders’ responses to a specific question. We use natural language processing techniques to get the stakeholder response that represents most other stakeholders’ responses. This study improves existing practices in three ways: Firstly, it reduces the human effort needed to collect the requirements; secondly, it reduces the time required to carry out this task with a large number of stakeholders; thirdly, it underlines the… More >

Tantan Zhu¹, Da Huang^2,3,*, Jianxun Chen¹, Yanbin Luo¹, Longfei Xu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 79-97, 2021, DOI:10.32604/cmes.2021.014808

Abstract Excavation and earth surface processes (e.g., river incision) always induce the unloading of stress, which can cause the failure of rocks. To study the shear mechanical behavior of a rock sample under unloading normal stress conditions, a new stress path for direct shear tests was proposed to model the unloading of stress caused by excavation and other processes. The effects of the initial stresses (i.e., the normal stress and shear stress before unloading) on the shear behavior and energy conversion were investigated using laboratory tests and numerical simulations. The shear strength of a rock under constant stress or under unloading… More >

Mustafa Turkyilmazoglu^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 1-22, 2021, DOI:10.32604/cmes.2021.012595

Abstract The present paper is devoted to the convergence control and accelerating the traditional Decomposition Method of Adomian (ADM). By means of perturbing the initial or early terms of the Adomian iterates by adding a parameterized term, containing an embedded parameter, new modified ADM is constructed. The optimal value of this parameter is later determined via squared residual minimizing the error. The failure of the classical ADM is also prevented by a suitable value of the embedded parameter, particularly beneficial for the Duan–Rach modification of the ADM incorporating all the boundaries into the formulation. With the presented squared residual error analysis,… More >

Caili Li¹, Dalin Tang^2,*,3, Jing Yao^4,*, Christopher Baird⁵, Haoliang Sun⁶, Chanjuan Gong⁷, Luyao Ma⁶, Yanjuan Zhang⁴, Liang Wang², Han Yu², Chun Yang⁸, Yongfeng Shao⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 159-174, 2021, DOI:10.32604/cmes.2021.014580

Abstract Aortic valve replacement (AVR) remains a major treatment option for patients with severe aortic valve disease. Clinical outcome of AVR is strongly dependent on implanted prosthetic valve size. Fluid-structure interaction (FSI) aortic root models were constructed to investigate the effect of valve size on hemodynamics of the implanted bioprosthetic valve and optimize the outcome of AVR surgery. FSI models with 4 sizes of bioprosthetic valves (19 (No. 19), 21 (No. 21), 23 (No. 23) and 25 mm (No. 25)) were constructed. Left ventricle outflow track flow data from one patient was collected and used as model flow conditions. Anisotropic Mooney–Rivlin… More >

Lin Zhang^1,2,*, Dong Xie¹, Zhong Bian¹, Yiting Zou¹, Han Zhou¹, Wenlu Cai¹, Hadi Yeilaghi¹, Xiaolei Fan^1,2, Changquan Zhang^1,2, Qiaoquan Liu^1,2,*

Phyton-International Journal of Experimental Botany, Vol.90, No.3, pp. 773-787, 2021, DOI:10.32604/phyton.2021.015229

Abstract In recent years, some super hybrid rice varieties were bred with strong culms and large panicles, which are mainly contributed by the ipa1-2D locus. A gain-of-function allele of OsSPL14 is the ipa1-2D and it can greatly increase the panicle primary branch number. However, the key downstream genes mediating this trait variation are not fully explored. In this study, we developed high-quality near-isogenic lines (NILs) with a difference of only 30 kb chromosomal segment covering the ipa1-2D locus. Using the NILs, we explored the impact of ipa1-2D on five sequential stages of early inflorescence development, and found that the locus can… More >

Suzana Vieira Rabêlo¹, Fernanda Granja da Silva Oliveira², Michele Miriam Calixto de Lira³, Livia Macedo Dutra³, Adilson Sartoratto⁴, Marta Cristina Teixeira Duarte⁴, Maria Claudia dos Santos Luciano⁵, Maria Francilene Souza Silva⁵, Cláudia do Ó Pessoa⁵, Manoel Odorico de Moraes Filho⁵, Emmanoel Vilaça Costa⁶, Jackson Roberto Guedes da Silva Almeida^1,3,*

Phyton-International Journal of Experimental Botany, Vol.90, No.3, pp. 921-931, 2021, DOI:10.32604/phyton.2021.013305

Abstract This study aimed to identify the chemical composition of essential oil from fruits (EOAF) and the hexanic crude extract from aerial parts (At-Hex) of atemoya (Annona cherimola x Annona squamosa), a hybrid belonging to the Annonaceae family. Cytotoxic and antimicrobial activity was also evaluated. OEAF was obtained by hydrodistillation using a Clevenger apparatus, and their composition was analyzed by gas chromatography-mass spectrometry (GC-MS) analyses. Cytotoxicity was tested against human tumor cell lines HCT-116 (colon carcinoma), SF-295 (glioblastoma), OVCAR-8 (ovarian carcinoma) and HL60 (leukemia) using 3-(4,5-dimethyl-2-thiazolyl)-2,5- diphenyl-2H-tetrazolium bromide (MTT) assay, while antimicrobial activity was conducted by bioauthography method against eleven microorganisms… More >

R. Ariza-Flores¹, D. Trujillo-García², M. A. Otero-Sánchez², E. Canales Sosa², C. H. Avendaño-Arrazate^3,*, L. A. Gálvez-Marroquín⁴, P. Cadena Iñiguez⁵

Phyton-International Journal of Experimental Botany, Vol.90, No.3, pp. 933-947, 2021, DOI:10.32604/phyton.2021.013227

Abstract The aim of this study was to evaluate some physiological aspects of papaya crops in semi conventional and organic production systems. The following factors assessed in this experiment were: 1. Production systems (organic and semi conventional); 2. Genotypes (Maradol and Maradona F1), and 3. Cover crop plants (Canavalia, vegetative cover and no cover). Twelve treatments were obtained -product of factors’ combination- and distributed under a threerepetition experimental design of subdivided parcels. The factors examined in this study, that changed the CO₂ assimilation rate, were production system and genotype. It was determined that the greatest gas exchange in papaya crops happened… More >

Chunxue Yang^*, Yajie Liu, Wenna Zhao, Na Wang

Phyton-International Journal of Experimental Botany, Vol.90, No.3, pp. 719-729, 2021, DOI:10.32604/phyton.2021.015024

Abstract To understand arbuscular mycorrhizal (AM) fungi resources and develop AM fungal species in ornamental plants with saline-alkaline tolerances, Iris lactea, which grows in the Songnen saline-alkaline grassland with a high ornamental value, was selected as the experimental material, and the colonization characteristics of its roots and the AM fungal diversity in its rhizosphere were explored. The results of the observations and calculations of mycorrhizae from ten different samples showed that AM fungi colonized the roots of I. lactea and formed Arum-type mycorrhizal structures. There was a significant correlation between soil spore density and pH value, while the colonization rate showed… More >