Open Access

ARTICLE

YINCHUN FANG^a, XINHUA LIU^a,b,*, XU YANG^a, CUIE WANG^a,*
Journal of Polymer Materials, Vol.36, No.2, pp. 111-119, 2019, DOI:10.32381/JPM.2019.36.02.1
Abstract Enzymes are green biocatalysts which have been widely used in many fields. Immobilization enzymes on nanofibrous membrane possessed easy recycling and high stability which would broaden their applications. Covalent immobilization of lipase could endow them higher stability than other protocols. In this study, a novel nanofibrous membrane containing epoxy groups and hydrophilic polyethylene oxide branch was used as a support for lipase immobilization. The immobilized lipase was used as the biocatalyst to catalyse Rap. stroermer reaction. The results showed that it obtained the high product yield of 88% when the volume ratio of methanol and water was 4:1, the dosage… More >

View

50

Download

41

Open Access

ARTICLE

XIAOYAN LIU^a,*, XU CHEN^a, HONGXING ZHANG^b, CHANGJUN ZHANG^a, SHIYUAN YANG^a, GUANGQUAN LI^a
Journal of Polymer Materials, Vol.36, No.2, pp. 121-132, 2019, DOI:10.32381/JPM.2019.36.02.2
Abstract In this work, three in situ impact polypropylene copolymer(IPC) samples were prepared through Ziegler-Natta catalyst only changing the feed composition (ethylene to ethylene and propylene molar ratio, C2/C2+C3) in gas-phase polymerization reactor. Polymer (IPC) were characterical by solvent classification, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), successive self-nucleation and annealing (SSA), nuclear magnetic resonance(13C-NMR) and scanning electron microscopy(SEM). The mechanical properties of IPC samples were tested.The results indicate that with similar ethylene content, the feed composition which determines the content and structure of EPR and EbP component in IPC, further impacts the rubber phase size and distribution in IPC,… More >

View

50

Download

52

Open Access

ARTICLE

FEHMI SALTAN^1,2, AYLIN PALAMUTLU², HAKAN AKAT^2,*
Journal of Polymer Materials, Vol.36, No.2, pp. 133-147, 2019, DOI:10.32381/JPM.2019.36.02.3
Abstract In this work, tetraphenylporphyrin (TPP) compound was first synthesized by the condensation reaction of pyrrole and benzaldehyde using Adler method. Then, the synthesized tetraphenylporphyrin was nitrated with sodium nitrite. Nitro-functionalized porphyrin (TPP-NO₂ ) compound was reduced to amine-functional using ammonia and this amine- functionalized porphyrin was reacted with methacryloyl chloride to obtain porphyrin-derived radical monomer (TPP-MAO). Copolymer was synthesized with obtained porphyrin functional monomer and styrene by free radical polymerization method. Structural characterization and spectroscopic studies of the synthesized compounds were carried out by FTIR, H¹ -NMR, UV spectroscopy. The molecular weight and thermal properties of the copolymer were determined… More >

View

52

Download

43

Open Access

ARTICLE

ZONGQIAN WANG, HAIWEI YANG, JIAN XING, ZHI LIU^*
Journal of Polymer Materials, Vol.36, No.2, pp. 149-159, 2019, DOI:10.32381/JPM.2019.36.02.4
Abstract Colored silk fibroin (SF) film can change the proportion of transmitted light composition and therefore shows potential application in optoelectronics area. However, few methods are reported for the preparation of colored SF film with good color fastness. Herein, colored SF film was prepared by coupling modification dyeing (CM-dyeing) of SF tyrosine residues in solution. SF film shows excellent color fastness due to the formation of the azo covalent bond formed by electrophilic substitution reaction between SF tyrosine residues and aniline diazonium salt. Furthermore, compared with the undyed film, the dyed SF film is effectively preserved its mechanical property by the… More >

View

65

Download

48

Open Access

ARTICLE

AYÇA BAL ÖZTÜRK^1,2,*, ZEHRA ÖZBA޳, BENGİ ÖZKAHRAMAN⁴, SERKAN EMİK⁵
Journal of Polymer Materials, Vol.36, No.2, pp. 161-173, 2019, DOI:10.32381/JPM.2019.36.02.5
Abstract A functionalized hydrogel composed of 2-(hydroxyethyl) methacrylate (HEMA) and acrylamide (AAm) was synthesized by amination and saponification reactions, respectively, and its functionality was examined for the elimination of copper(II) ions. The maximum adsorption capacity for copper(II) ions was 0.617 mmol g^-1 before saponification, whereas it was 1.2225 mmol g^-1 after saponification. The adsorption data was analyzed with pseudo-first-order (r² =0.8867), intra-particle diffusion (r² =0.9453), Elovich (r²=0.9489) and pseudo-secondorder(r² =0.9999) kinetic models. Based on the adsorption equilibrium experimental data Freundlich(r² =0.9964), Langmuir(r²=0.998) and Dubinin–Radushkevich (D-R) (r² =0.9960) adsorption isotherms provided good fits for all of experimental results. Finally, the datas of… More >

View

42

Download

44

Open Access

REVIEW

AMRITA SHARMA, P. P. PANDE
Journal of Polymer Materials, Vol.36, No.2, pp. 175-194, 2019, DOI:10.32381/JPM.2019.36.02.6
Abstract ‘Comb-like polymers’ are a special class of polymers. These are consisting of two types of chains, first one is the backbone chain and second is long side chains. The structure of such a polymer is very similar to hair comb. Usually, every monomer unit in the backbone has a long n-alkyl side chain. Comb like polymers have an intrinsic ability towards forming ordered structure. Now-a-days, these polymers find wide range of applications because of their excellent physicochemical properties. Some applications are in preparation of polysoaps (polymeric disinfectants), as dispersing agent for ink and paints, textile industry, in surface modification of… More >

View

51

Download

47

Open Access

ARTICLE

KAVITA^*, R.K. TIWARI
Journal of Polymer Materials, Vol.36, No.2, pp. 195-205, 2019, DOI:10.32381/JPM.2019.36.02.7
Abstract The effect of poly (vinyl butyral) and acid functionalized multiwalled carbon nanotubes (f-MWCNT) on the thermal and mechanical performance of Kevlar fiber reinforced novolac epoxy nanocomposites was investigated and presented in this paper. Nanocomposite containing 1.5 wt. % poly (vinyl butyral) and 0.5 wt. % f-MWCNT exhibited best thermal and mechanical properties (except flexural strength) among all the nanocomposites reported here. It showed ~5%, 27% and 126 % improvement in tensile strength, young’s modulus and impact strength respectively as compared to the neat novolac epoxy Kevlar composite.Nanocomposite containing 0.5 wt. % f- MWCNT and 2 wt. % poly (vinyl butyral)… More >

View

48

Download

46