Molecular & Cellular Biomechanics, Vol.3, No.4, pp. 179-180, 2006, DOI:10.32604/mcb.2006.003.179

Abstract This article has no abstract. More >

Qiang Wang, Tie Liu, Yin Liu, Yi Yuan, Jicheng He

The International Conference on Computational & Experimental Engineering and Sciences, Vol.19, No.3, pp. 89-90, 2011, DOI:10.3970/icces.2011.019.089

Abstract Recently, the application of high magnetic fields to materials processing is considering a promising approach to prepare functional materials with special performances. In the present study, based on the techniques of solidification, quenching, and isothermal annealing in both the semisolid and melting states in high magnetic fields, the solidified structure evolution of the Mn-Sb and Al-Ni alloy systems was systematically studied under different magnetic field conditions. A novel method was proposed to in situ fabricate the graded or aligned materials using gradient or uniform high magnetic fields. The results show that the primary MnSb particles were gathered in one certain… More >

H.S. Lee¹, W.S. Chu¹, Y.C. Kang¹, H.J. Kang¹, S.H. Ahn²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.4, No.3, pp. 195-200, 2007, DOI:10.3970/icces.2007.004.195

Abstract The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the Proton Exchange Membrane (PEM) fuel cell stack, and it takes a large portion of stack volume, weight and cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding and by machining. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. Flow channels were fabricated by compression molding applying design of experiments (DOE) in order to evaluate moldability. The cost… More >

P. Reena Monica^1,*, V. T. Sreedevi²

CMES-Computer Modeling in Engineering & Sciences, Vol.119, No.3, pp. 577-591, 2019, DOI:10.32604/cmes.2019.04718

Abstract A mathematical model and experimental analysis of the impact of oxide thickness on the ambipolar conduction in Schottky Barrier Carbon Nanotubes (CNTs) Field Effect Transistor (SB CNTFETs) is presented. Suppression of ambipolar conduction in SB CNTFETs is imperative in order to establish them as the future of IC technology. The ambipolar nature of SB CNTFETs leads to a great amount of leakage current. Employing a gate oxide dielectric of thickness, t_ox~50 nm suppresses the ambipolar behavior. In an SB CNTFET, it is the electric field at the source/drain contacts that control the conductance and the band bending length at the… More >

Ying Mao¹, Chaojing Li¹, Peng Ge¹, Fujun Wang^1,*, Lu Wang^1,*

Molecular & Cellular Biomechanics, Vol.15, No.3, pp. 143-154, 2018, DOI: 10.3970/mcb.2018.03987

Abstract Heparin/ PEG-PCL core-shell microcarriers were fabricated in one-step via coaxial-electrospraying technology. Optimization of the coaxial-electrospraying processing is by controlling the PEG-PCL concentration, applied voltage, receiving distance, and feed rate. The influence of the electrospray parameters on microsphere morphology was studied by optical microscopy and scanning electron microscopy. The functional groups and components of the electrosprayed microspheres were characterized by Fourier transform infrared spectroscopy (FTIR). Transmission electron microscope (TEM) observation proved the core-shell structure of heparin-loaded PEG-PCL microspheres. Drug loading and releasing study demonstrated that PEG-PCL concentration could control the encapsulation efficiency and releasing activity of the heparin in the microspheres.… More >

Tak-Sing Wong^*, Branden Brough^†, Chih-Ming Ho^∗,‡

Molecular & Cellular Biomechanics, Vol.6, No.1, pp. 1-56, 2009, DOI:10.3970/mcb.2009.006.001

Abstract Mimicking nature's approach in creating devices with similar functional complexity is one of the ultimate goals of scientists and engineers. The remarkable elegance of these naturally evolved structures originates from bottom-up self-assembly processes. The seamless integration of top-down fabrication and bottom-up synthesis is the challenge for achieving intricate artificial systems. In this paper, technologies necessary for guided bottom-up assembly such as molecular manipulation, molecular binding, and the self assembling of molecules will be reviewed. In addition, the current progress of synthesizing mechanical devices through top-down and bottom-up approaches will be discussed. More >

Sheng Yan Li¹, Bin Gang Xu^1,2, Xiao Ming Tao¹, Hong Hu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.77, No.1, pp. 33-56, 2011, DOI:10.3970/cmes.2011.077.033

Abstract Slender yarn structure made from natural fibers, nano-fibers, carbon nanotubes or other types of fibrous materials is all formed by twisting an assembly of short or long fibers and its performance is significantly influenced by the physical behavior of these fibers in the slender yarn forming region - a small triangle area called spinning triangle. In this paper, a new generalized FEM model of spinning triangle has been developed to theoretically analyze the fiber structural and mechanical performance in fabrication of these slender yarn structures. In this proposed model, a geometrical model of spinning triangle is developed and the initial… More >

Wenjing Ye¹, Subrata Mukherjee²

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.1, pp. 111-120, 2000, DOI:10.3970/cmes.2000.001.111

Abstract Polynomial driving-force comb drives are designed using numerical simulation. The electrode shapes are obtained using the indirect boundary element method. Variable gap comb drives that produce combinations of linear, quadratic, and cubic driving-force profiles are synthesized. This inverse problem is solved by an optimization procedure. Sensitivity analysis is carried out by the direct differentiation approach (DDA) in order to compute design sensitivity coefficients (DSCs) of force profiles with respect to parameters that define the shapes of the fingers of a comb drive. The DSCs are then used to drive iterative optimization procedures. Designs of variable gap comb drives with linear,… More >

Morteza Eslamian^1,2, M. Ziad Saghir^1,3

FDMP-Fluid Dynamics & Materials Processing, Vol.8, No.4, pp. 353-380, 2012, DOI:10.3970/fdmp.2012.008.353

Abstract In this paper recent advances pertinent to the applications of thermodiffusion or thermomigration in the fabrication of micro and nano metal-doped semiconductor-based patterns and devices are reviewed and discussed. In thermomigration, a spot, line, or layer of a p-type dopant, such as aluminum, which is deposited on a semiconductor surface, penetrates into the semiconductor body due to the presence of a temperature gradient applied across the wafer body. The trails of p-doped regions within an n-type semiconductor, in the form of columns or walls, may be used for several applications, such as the isolation of a part of a semiconductor… More >

S. Zhao¹, Zichun Yang^1,2, X. G. Zhou³, X. Z. Ling⁴, L. S. Mora⁵, D. Khoshkhou⁶, J. Marrow⁵

CMC-Computers, Materials & Continua, Vol.42, No.2, pp. 103-124, 2014, DOI:10.3970/cmc.2014.042.103

Abstract Continuous SiC fiber reinforced SiC matrix composites (SiC/SiC) have been studied and developed for high temperature and fusion applications. Polymer impregnation and pyrolysis (PIP) is a conventional technique for fabricating SiC/SiC composites. In this research, KD-1 SiC fibers were employed as reinforcements, a series of coatings such as pyrocarbon (PyC), SiC and carbon nanotubes (CNTs) were synthesized as interphases, PCS and LPVCS were used as precursors and SiC/SiC composites were prepared via the PIP method. The mechanical properties of the SiC/SiC composites were characterized. Relationship between the interphase shear strength and the fracture toughness of the composites was established. X-ray… More >