E. M. Ciannamea^1,*, L. A. Castillo^2,3, R. A. Ruseckaite¹, S. E. Barbosa^2,3

Journal of Renewable Materials, Vol.7, No.1, pp. 21-30, 2019, DOI:10.32604/jrm.2019.00043

Abstract Blends of gelatin (Ge) plasticized with varying amounts of glycerol (Gly), buffer solution pH 10 and epoxidized soybean oil (ESO) to enhance hydrophobicity were prepared by mixing and injection-molding. Blends were characterized by rheological tests and microscopy to select optimal conditions for scaling up their processing. The effect of each component on rheological response was analyzed using parallel plate geometry. Coating of gelatin specimens with PDMS during rheological tests led to reliable and reproducible results since water evaporation was prevented. A gradual increment in ESO concentration led to blends with increased degree of phase separation, as evidenced by optical and… More >

Y.W. Yun, M.K. Park

The International Conference on Computational & Experimental Engineering and Sciences, Vol.9, No.1, pp. 25-26, 2009, DOI:10.3970/icces.2009.009.025

Abstract This paper presents a semi-active control of vehicle suspension system with a hybrid damper. This damper consists of a conventional oil damper and magnetorheological fluidic (MRF) accumulator, which comprises gas accumulator and MRF device. The shaft of MRF device, fitted to in series the side of gas accumulator, is connected with a floating piston that divided into gas chamber and oil chamber. During the oil damper piston motion, the floating piston also behaves in the same direction of piston and the pressure of gas chamber varies. MRF accumulator will provides a force to the damper through retarding the movement of… More >

Zhangzhen Sun¹, Tianhe Xu^1,*, Fan Gao¹, Chunhua Jiang¹, Guochang Xu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.119, No.2, pp. 263-280, 2019, DOI:10.32604/cmes.2019.04425

Abstract Abnormal effects in GPS broadcast ephemerides can have a significant effect on real-time navigation and positioning solutions that use the orbit and clock error data provided by GPS broadcast ephemerides. This paper describes three types of non-integer-hour navigation data in GPS broadcast ephemeris data. Compared with GPST integer hour data, we find that there are two types of data blocks for non-integer-hour navigation containing gross errors with different levels of precision, which is reflected in the user range accuracy (URA) of the broadcast ephemeris. These gross errors can cause large deviations when using the GPS broadcast ephemeris for orbit calculation… More >

Youping Chen¹, James D Lee², Azim Esk,arian¹

CMES-Computer Modeling in Engineering & Sciences, Vol.5, No.1, pp. 35-44, 2004, DOI:10.3970/cmes.2004.005.035

Abstract This paper addresses the need of theories and simulations for material body of mesoscopic and microscopic sizes. An overview of polar theories is presented. The micropolar theory proposed by Eringen is introduced and compared with other polar theories. Constitutive equations of micropolar thermo-visco-elastic solid are derived. Finite element analyses have been performed for a few sample problems with wide range of length scales. Based on the discussion, comparison and computer simulations, the unique feature and applicability of micropolar theory are demonstrated. More >

Jinwei Wang^1,*, Yangyang Li²

Journal of Information Hiding and Privacy Protection, Vol.1, No.2, pp. 77-86, 2019, DOI:10.32604/jihpp.2019.07186

Abstract With the rapid development of information technology, digital images have become an important medium for information transmission. However, manipulating images is becoming a common task with the powerful image editing tools and software, and people can tamper the images content without leaving any visible traces of splicing in order to gain personal goal. Images are easily spliced and distributed, and the situation will be a great threat to social security. The survey covers splicing image and its localization. The present status of splicing image localization approaches is discussed along with a recommendation for future research. More >

Mohamed Ammar¹, Ramzi Khiari^2,3,4*, Mohamed Naceur Belgacem^3,4*, Elimame Elaloui¹

Journal of Renewable Materials, Vol.5, No.2, pp. 116-123, 2017, DOI:10.7569/JRM.2016.634136

Abstract The present study investigated the preparation of biomatrices from Stipa tenacissima L. and its valorization for fiberboard application. Resins were produced by extracting lignin from the Stipa tenacissima L. black liquor by soda process and combining it with glyoxal as crosslinking agent to produce lignin-glyoxal-resin (LGR). The matrix was characterized by several methods, such as FTIR and ATG/ATD, and then mixed with date palm rachis as reinforcing fibers in different proportions of 30 and 50% (w/w with respect to the matrix) to produce biodegradable composite materials. Then, their thermal and mechanical properties were determined, using differential scanning calorimetry (DSC) and… More >

Mingzhi Luo¹, Kai Ni¹, Peili Yu¹, Yang Jin², Lei Liu¹, Jingjing Li¹, Yan Pan¹, Linhong Deng^1,*

Molecular & Cellular Biomechanics, Vol.16, No.2, pp. 141-151, 2019, DOI:10.32604/mcb.2019.06756

Abstract Airway hyperresponsiveness (AHR) is the cardinal character of asthma, which involves the biomechanical properties such as cell stiffness and traction force of airway smooth muscle cells (ASMCs). Therefore, these biomechanical properties comprise logical targets of therapy. β2-adrenergic agonist is currently the mainstream drug to target ASMCs in clinical practice for treating asthma. However, this drug is known for side effects such as desensitization and non-responsiveness in some patients. Therefore, it is desirable to search for new drug agents to be alternative of β2-adrenergic agonist. In this context, sanguinarine, a natural product derived from plants such as bloodroots, that has been… More >

Jiangguo Lin¹, Botao Xiao^1,2, Quhuan Li¹, Ying Fang¹, Jianhua Wu^1,*

Molecular & Cellular Biomechanics, Vol.15, No.1, pp. 37-49, 2018, DOI:10.3970/mcb.2018.015.037

Abstract The protein structure-function paradigm implies that the structure of a protein defines its function. Crystallization techniques such as X-ray, electron microscopy (EM) and nuclear magnetic resonance (NMR) have been applied to resolve the crystal structure of numerous proteins, provided beautiful and informative models of proteins. However, proteins are not intrinsically in static state but in dynamic state, which is lack in crystal models. The protein flexibility, a key mechanical property of proteins, plays important roles in various biological processes, such as ligand-receptor interaction, signaling transduction, substrate recognition and post-translational modifications. Advanced time-resolved crystallography has been developed recent years to visualize… More >

Kefeng Liu^{1,2, §}, Zhengyu Zhang^{1,3, §}, Ting Pei¹, Ziqing Li⁴, Jingjing Wang¹, Hong Wang¹, Suning Ping¹, Lie Deng¹, Linli Wang¹, Jintao Huang⁵, Puyi Sheng⁴, Shuying Liu¹, Chaohong Li¹

Molecular & Cellular Biomechanics, Vol.14, No.2, pp. 101-123, 2017, DOI:10.3970/mcb.2017.014.099

Abstract This study was designed to investigate the effects of mechanical (MS) and/or oxidized low-density lipoprotein on proliferation and apoptosis of RAW264.7 macrophages and the underlying mechanisms. The cultured quiescent RAW264.7 macrophages were subject to stimulation with MS and/or in the presence or absence of simvastatin and then harvested for Western blot, and immunoflourecence. Either MS or alone could cause increase in cell proliferation and apoptosis, while their combination led to an additive effect. In terms of mechanisms, MS and/or significantly increased phosphorylation levels of MAPKs (ERKs, JNKs and p38MAPK), promoted the reactive oxygen species (ROS) and up-regulated DNA methylation in… More >

He Kunjin^1,2, Zou Zeyu¹, Zhang Rongli¹

Molecular & Cellular Biomechanics, Vol.12, No.4, pp. 265-286, 2015, DOI:10.32604/mcb.2015.012.263

Abstract To quickly construct the orthopedic plates and to conveniently edit it, a novel method for designing the plates is put forward based on feature idea and parameterization. Firstly, attached to the existing or repaired bone model, the region of interest (ROI) is selected as the abutted surface of orthopedic plate, and the ROI is reconstructed to form a CAD surface. Secondly, the CAD surface is to be defined as a surface feature (SF) and then some semantic parameters are configured for it. Lastly, the plate body is constructed through thickening, and some higher parameters are defined for it so as… More >