Qifei Du¹, Zhigang Fang^2,3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.5, pp. 887-898, 2021, DOI:10.32604/fdmp.2021.016265

Abstract This study examines the thermal runaway of a lithium ion battery caused by poor heat dissipation performances. The heat transfer process is analyzed on the basis of standard theoretical concepts. Water mist additives are considered as a tool to suppress the thermal runaway process. The ensuing behaviour of the battery in terms of surface temperature and heat generation is analyzed for different charge and discharge rates. It is found that when the remaining charge is 100%, the heat generation rate of the battery is the lowest, and the surface temperature with a 2C charge rate is higher than that obtained… More >

A. N. M. Alahmadi¹, Hegazy Rezk^2,3,*

Computer Systems Science and Engineering, Vol.37, No.1, pp. 63-71, 2021, DOI:10.32604/csse.2021.015029

Abstract A robust single-sensor global maximum power point tracking (MPPT) strategy based on modern optimization for photovoltaic systems considering shading conditions is proposed in this work. The proposed strategy is designed for battery charging applications and direct current (DC) microgrids. Under normal operation, the curve of photovoltaic (PV) output power versus PV voltage contains only a single peak point. This point can be simply captured using any traditional tracking method like perturb and observe. However, this situation is completely different during the shadowing effect where several peaks appear on the power voltage curve. Most of these peaks are local with only… More >

Rajesh Kaluri¹, Dharmendra Singh Rajput¹, Qin Xin^2,*, Kuruva Lakshmanna¹, Sweta Bhattacharya¹, Thippa Reddy Gadekallu¹, Praveen Kumar Reddy Maddikunta¹

Intelligent Automation & Soft Computing, Vol.27, No.2, pp. 453-469, 2021, DOI:10.32604/iasc.2021.014369

Abstract Internet of Things (IoT) and related applications have successfully contributed towards enhancing the value of life in this planet. The advanced wireless sensor networks and its revolutionary computational capabilities have enabled various IoT applications become the next frontier, touching almost all domains of life. With this enormous progress, energy optimization has also become a primary concern with the need to attend to green technologies. The present study focuses on the predictions pertinent to the sustainability of battery life in IoT frameworks in the marine environment. The data used is a publicly available dataset collected from the Chicago district beach water.… More >

Lu Wang^1,2, Yulong Guo², Jianbin Liang^3,*, Haitao Tian⁴

Energy Engineering, Vol.117, No.6, pp. 471-480, 2020, DOI:10.32604/EE.2020.011131

Abstract The increasingly severe global energy crisis has brought great challenges to the energy field, and renewable energy power generation system has been widely concerned because of its characteristics of green and inexhaustible. However, renewable energy also has some limitations in its specific application, and affects the grid-connected power generation of new energy. In this paper, based on the background of photovoltaic power station, the intelligent energy storage control method for single inverter is put forward to assist a single inverter, and the DC component of fluctuating power is extracted by using the moving average function; furthermore, the intelligent energy storage… More >

Shafiqur Rehman¹, Umar T. Salman^2,*, Luai M. Alhems¹

Energy Engineering, Vol.117, No.6, pp. 343-365, 2020, DOI:10.32604/EE.2020.011471

Abstract Renewable energy has received much attention in the last few decades and more investment is being attracted across the world to boost its contribution towards the existing energy mix. In the Kingdom of Saudi Arabia (KSA), many studies have been conducted on the potential of renewable energy sources (RES), such as wind, solar, and geothermal. Many of these studies have revealed that the Kingdom is blessed with an abundance of RES with wind energy being the best after solar. This paper presents an analysis of windfarm distributed generation (WFDG) for energy management strategy in the Eastern Province of KSA. The… More >

Yudong Wang^{1, 2}, Jie Tan^{1, *}, Zhenjie Liu¹, Allah Ditta³

CMC-Computers, Materials & Continua, Vol.65, No.3, pp. 2111-2122, 2020, DOI:10.32604/cmc.2020.011098

Abstract Batteries are often packed together to meet voltage and capability needs. However, due to variations in raw materials, different ages of equipment, and manual operation, there is inconsistency between batteries, which leads to reduced available capacity, variability of resistance, and premature failure. Therefore, it is crucial to pack similar batteries together. The conventional approach to screening batteries is based on their capacity, voltage and internal resistance, which disregards how batteries perform during manufacturing. In the battery discharge process, real time discharge voltage curves (DVCs) are collected as a set of unlabeled time series, which reflect how the battery voltage changes.… More >

Isma Farah Siddiqui¹, Scott Uk-Jin Lee^2,*, Asad Abbas³

Intelligent Automation & Soft Computing, Vol.26, No.1, pp. 107-119, 2020, DOI:10.31209/2019.100000132

Abstract The issue of battery drainage in the gigantic smart meters network such as semantic-aware IoT-enabled smart meter has become a serious concern in the smart grid framework. The grid core migrates existing tabular datasets i.e., Relational data to semantic-aware tuples in its Resource Description Framework (RDF) format, for effective integration among multiple components to work aligned with IoT. For this purpose, WWW Consortium (W3C) recommends two specifications as mapping languages. However, both specifications use entire RDB schema to generate data transformation mapping patterns and results large quantity of unnecessary transformation. As a result, smart meters use huge computing resources, maximum… More >

Geetha N., Sankar A.

Intelligent Automation & Soft Computing, Vol.24, No.4, pp. 711-719, 2018, DOI:10.1080/10798587.2017.1309003

Abstract The routing protocol for an ad hoc network should be efficient in utilizing the available resources to prolong the network lifetime. A Multi Criterion Fuzzy based Energy Efficient Routing Protocol (MCFEER) for Ad hoc Networks selects the path on constraints like bandwidth, battery life, hop count and buffer occupancy. In the route discovery phase, fuzzy system is applied for optimal route selection by destination node leading to successful data transmission. Multiple stable paths are preserved in route cache for usage during the route maintenance phase. The results are competitive when compared with Power aware Energy Efficient Routing (PEER) protocol using… More >

Shengqi Zhang, Bei Yuan, Jianfeng Zhao

Intelligent Automation & Soft Computing, Vol.25, No.4, pp. 745-753, 2019, DOI:10.31209/2019.100000078

Abstract With the current trend of deregulation, more power exchange between GENCOs and DISCOs in different areas exists in the power system. To mitigate the unscheduled power exchange meets the common interests of GENCOs and DISCOs, and avoids the power over-loading on tie-lines. However, in the current control performance standards (CPS), frequency deviations have priority in the conventional automatic generation control (C-AGC). Thus, a storagebased tie-line control loop (STCL) on the basis of C-AGC (STCL-AGC) is proposed in this paper, which makes a better tradeoff in the recovery of the frequency deviations and the unscheduled power exchange. In STCL-AGC, utility-scaled battery… More >

Chaoyi Wan^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.4, pp. 343-356, 2019, DOI:10.32604/fdmp.2019.07812

Abstract A comparative numerical study has been conducted on the thermal performance of a heat pipe cooling system considering several influential factors such as the coolant flow rate, the coolant inlet temperature, and the input power. A comparison between numerical data and results available in the literature has demonstrated that our numerical procedure could successfully predict the heat transfer performance of the considered heat pipe cooling system for a battery. Specific indicators such as temperature, heat flux, and pressure loss were extracted to describe the characteristics of such a system. On the basis of the distributions of the temperature ratio of… More >