John Freddy Gelves-Díaz^1,*, Ludovic Dorkis², Richard Monroy-Sepúlveda¹, Sandra Rozo-Rincón¹, Yebrail Alexis Romero-Arcos¹

Journal of Renewable Materials, Vol.11, No.10, pp. 3769-3787, 2023, DOI:10.32604/jrm.2023.029270

Abstract Secondary lignocellulosic biomass has proved to be useful as an energy source through its oxidation by means of combustion processes. In accordance with the above, in this paper, we wanted to study the ash from urban pruning residues that are generated in cities in the Neotropics. Species such as Licania tomentosa, Azadirachta indica, Ficus benjamina, Terminalia catappa, Leucaena leucocephala, Prosopis juliflora and Pithecellobium dulce were selected because they have been previously studied and showed potential for thermal energy generation. These materials were calcined in an oxidizing atmosphere and characterized by X-ray diffraction and fluorescence, scanning electron microscopy with microchemistry, BET… More > Graphic Abstract

Morris Kayitare^1,2,*, Gace Athanase Dalson^2,3, Al-Mas Sendegeyad⁴

Energy Engineering, Vol.120, No.9, pp. 2155-2175, 2023, DOI:10.32604/ee.2023.028559

Abstract Standalone Solar PV systems have been vital in the improvement of access to energy in many countries. However, given the large cost of solar PV plants’ components, in developing countries, there is a dear need for such components to be subsidised and incentivised for the consumers to afford the produced energy. Moreover, there is a need for optimal sizing of the solar PV plants taking into account the solar information, energy requirement for various activities, and economic conditions in the off-grid regions in Rwanda. This study aims to develop optimally sized solar PV plants suited to rural communities in Rwanda.… More > Graphic Abstract

XINTONG LIU^1,2,3, EMIKO SANADA^1,3,4, JIANG LI⁵, XIAOMENG LI⁶, HIROYUKI OSADA^1,4,7,*, NOBUMOTO WATANABE^1,2,3,*

Oncology Research, Vol.31, No.5, pp. 645-654, 2023, DOI:10.32604/or.2023.030240

Abstract β-transducin repeat-containing protein (β-TrCP) is an F-box protein subunit of the E3 Skp1-Cullin-F box (SCF) type ubiquitin-ligase complex, and provides the substrate specificity for the ligase. To find potent ligands of β-TrCP useful for the proteolysis targeting chimera (PROTAC) system using β-TrCP in the future, we developed a high-throughput screening system for small molecule β-TrCP ligands. We screened the chemical library utilizing the system and obtained several hit compounds. The effects of the hit compounds on in vitro ubiquitination activity of SCF^β-TrCP1 and on downstream signaling pathways were examined. Hit compounds NPD5943, NPL62020-01, and NPL42040-01 inhibited the TNFα-induced degradation of… More > Graphic Abstract

John Freddy Gelves Díaz^1,*, Ludovic Dorkis², Richard Monroy-Sepúlveda¹, Sandra Rozo-Rincón¹, Gabriel de Jesús Camargo Vargas³

Journal of Renewable Materials, Vol.11, No.9, pp. 3547-3566, 2023, DOI:10.32604/jrm.2023.029267

Abstract The material associated with tree pruning in a city in the Colombian neotropics was characterized in order to determine its energy potential. The species studied for their relevance in the territory were Prosopis juliflora, Licania tomentosa, Terminalia catappa, Azadirachta indica, Pithecellobium dulce, Ficus benjamina and Leucaena leucocephala. Moisture content, bulk density, hygroscopic response, elemental chemical analysis, proximal analysis, calorific value, ease of ignition and combustion, thermogravimetric and heat flow analysis, steam generation capacity, and qualitative analysis of gases (mass spectrometry) were determined. The results that were obtained show high initial moisture contents that vary between 37% and 67% and a… More > Graphic Abstract

XINRUI SHI¹, XIA GAO¹, WENCONG LIU², XUEJIAO TANG¹, JIAYI LIU¹, DONGCHEN PAN¹, XUEQING DUAN¹, YUQING JIN¹, WEIYAN REN¹, LEI YANG^1,*, WENXUAN LIU^1,*

Oncology Research, Vol.31, No.4, pp. 569-590, 2023, DOI:10.32604/or.2023.028964

Abstract Hepatocellular carcinoma (HCC) is the most common fatal cancer worldwide, patients with HCC have a high mortality rate and poor prognosis. PANoptosis is a novel discovery of programmed cell death associated with cancer development. However, the role of PANoptosis in HCC remains obscure. In this study, we enrolled 274 PANoptosisrelated genes (PANRGs) and screened 8 genes to set up a prognostic model. A previous scoring system calculated PANscore was utilized to quantify the individual risk level of each HCC patient, and the reliability of the prognostic model has been validated in an external cohort. Nomogram constructed with PANscore and clinical… More >

Marwah Subhi Attallah, Reem Alaa Mohammed^*, Ruaa Haitham Abdel-Rahim

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2449-2469, 2023, DOI:10.32604/fdmp.2023.027750

Abstract This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells, walnut shells, and carbon fibers dispersed in a polyester matrix. MINITAB (L16) Taguchi experiments were used to determine the optimal combination of parameters. In particular, an erosion device consisting of a motor with a constant flow rate of 45 L/min, a pump with a diameter of 40 mm, a nozzle with a diameter of 5 mm, and a tank made of “perspex glass” 55 cm long, 30 cm tall, and 25 cm wide was used. The tests were conducted by varying the sample-to-nozzle distance, the… More > Graphic Abstract

Jeongha Lee¹, Hyokyung Bahn^2,*

CMC-Computers, Materials & Continua, Vol.76, No.1, pp. 607-629, 2023, DOI:10.32604/cmc.2023.039236

Abstract Due to the recent trend of software intelligence in the Fourth Industrial Revolution, deep learning has become a mainstream workload for modern computer systems. Since the data size of deep learning increasingly grows, managing the limited memory capacity efficiently for deep learning workloads becomes important. In this paper, we analyze memory accesses in deep learning workloads and find out some unique characteristics differentiated from traditional workloads. First, when comparing instruction and data accesses, data access accounts for 96%–99% of total memory accesses in deep learning workloads, which is quite different from traditional workloads. Second, when comparing read and write accesses,… More >

Sri Hidayati^1,*, Eugenia Fonny Budiyanto¹, Hadi Saputra¹, Sutopo Hadi¹, Apri Heri Iswanto^2,3, Nissa Nurfajrin Solihat⁴, Petar Antov⁵, Lee Seng Hua^6,7, Widya Fatriasari^4,8, Mohd. Sapuan Salit⁹

Journal of Renewable Materials, Vol.11, No.6, pp. 2865-2879, 2023, DOI:10.32604/jrm.2023.027579

Abstract Black liquor is obtained as a by-product of the pulping process, which is used to convert biomass into pulp by removing lignin, hemicelluloses and other extractives from wood to free cellulose fibers. Lignin represents a major constituent in black liquor, with quantities varying from 20% to 30%, of which a very low share is used for manufacturing value-added products, while the rest is mainly burned for energy purposes, thus underestimating its great potential as a raw material. Therefore, it is essential to establish new isolation and extraction methods to increase lignin valorization in the development of bio-based chemicals. The aim… More > Graphic Abstract

Abdellah Asbayou^*, Ahmed Ihlal, Ismail Isknan, Ahmed Soussi, Lahoussine Bouhouch

Journal of Renewable Materials, Vol.11, No.5, pp. 2249-2264, 2023, DOI:10.32604/jrm.2023.025456

Abstract Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco. The optical transmittance of the front glass was found to depend on the nature and density of dust. The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy. It was found that the granulometry of dust particles depends on the study area. For a dust density of around 20 g/m², the maximum power Pmax of the solar panel decreases drastically from 30 to 20 W for the (HP)… More > Graphic Abstract

Junzhen Di, Xueying Sun^*, Siyi Zhang, Yanrong Dong, Bofu Yuan

Journal of Renewable Materials, Vol.11, No.5, pp. 2209-2232, 2023, DOI:10.32604/jrm.2023.025241

Abstract To address the serious pollution of heavy metals in AMD, the difficulty and the high cost of treatment, Fe₃O₄-L was prepared by the chemical co-precipitation method. Based on the single-factor and RSM, the effects of particle size, total Fe concentration, the molar ratio of Fe²⁺ to Fe³⁺ and water bath temperature on the removal of AMD by Fe₃O₄-L prepared by chemical co-precipitation method were analyzed. Static adsorption experiments were conducted on Cu²⁺, Zn²⁺ and Pb²⁺ using Fe₃O₄-L prepared under optimal conditions as adsorbents. The adsorption properties and mechanisms were analyzed by combining SEM-EDS, XRD and FTIR for characterization. The study… More > Graphic Abstract