Fadhil Mukhlif^1,*, Norafida Ithnin¹, Roobaea Alroobaea², Sultan Algarni³, Wael Y. Alghamdi², Ibrahim Hashem⁴

CMC-Computers, Materials & Continua, Vol.77, No.1, pp. 583-599, 2023, DOI:10.32604/cmc.2023.038757

Abstract The World Health Organization (WHO) refers to the 2019 new coronavirus epidemic as COVID-19, and it has caused an unprecedented global crisis for several nations. Nearly every country around the globe is now very concerned about the effects of the COVID-19 outbreaks, which were previously only experienced by Chinese residents. Most of these nations are now under a partial or complete state of lockdown due to the lack of resources needed to combat the COVID-19 epidemic and the concern about overstretched healthcare systems. Every time the pandemic surprises them by providing new values for various parameters, all the connected research… More >

Mesfer Al Duhayyim¹, Majdy M. Eltahir², Ola Abdelgney Omer Ali³, Amani Abdulrahman Albraikan⁴, Fahd N. Al-Wesabi², Anwer Mustafa Hilal^5,*, Manar Ahmed Hamza⁵, Mohammed Rizwanullah⁵

CMC-Computers, Materials & Continua, Vol.77, No.1, pp. 1355-1371, 2023, DOI:10.32604/cmc.2023.024198

Abstract Earth resource and environmental monitoring are essential areas that can be used to investigate the environmental conditions and natural resources supporting sustainable policy development, regulatory measures, and their implementation elevating the environment. Large-scale forest fire is considered a major harmful hazard that affects climate change and life over the globe. Therefore, the early identification of forest fires using automated tools is essential to avoid the spread of fire to a large extent. Therefore, this paper focuses on the design of automated forest fire detection using a fusion-based deep learning (AFFD-FDL) model for environmental monitoring. The AFFD-FDL technique involves the design… More >

Yuling Dou¹, Fengqin Yao¹, Xiandong Wang¹, Liang Qu², Long Chen³, Zhiwei Xu⁴, Laihui Ding⁴, Leon Bevan Bullock¹, Guoqiang Zhong¹, Shengke Wang^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.138, No.1, pp. 1001-1014, 2024, DOI:10.32604/cmes.2023.027764

Abstract UAV marine monitoring plays an essential role in marine environmental protection because of its flexibility and convenience, low cost and convenient maintenance. In marine environmental monitoring, the similarity between objects such as oil spill and sea surface, Spartina alterniflora and algae is high, and the effect of the general segmentation algorithm is poor, which brings new challenges to the segmentation of UAV marine images. Panoramic segmentation can do object detection and semantic segmentation at the same time, which can well solve the polymorphism problem of objects in UAV ocean images. Currently, there are few studies on UAV marine image recognition… More >

Saqlain Abbas^1,2,*, Zulkarnain Abbas³, Xiaotong Tu⁴, Yanping Zhu²

Journal on Artificial Intelligence, Vol.5, pp. 43-56, 2023, DOI:10.32604/jai.2023.040948

Abstract Structural health monitoring (SHM) is considered an effective approach to analyze the efficient working of several mechanical components. For this purpose, ultrasonic guided waves can cover long-distance and assess large infrastructures in just a single test using a small number of transducers. However, the working of the SHM mechanism can be affected by some sources of variations (i.e., environmental). To improve the final results of ultrasonic guided wave inspections, it is necessary to highlight and attenuate these environmental variations. The loading parameters, temperature and humidity have been recognized as the core environmental sources of variations that affect the SHM sensing… More >

Kenedy A. Greyson^*

Journal on Internet of Things, Vol.5, pp. 1-11, 2023, DOI:10.32604/jiot.2023.040255

Abstract Rainwater harvesting (RWH) systems have been the source of domestic water for many years and still becoming essential in many communities of developing countries. However, due to various reasons, there are several sources of contamination in the rainwater cistern systems. Dissolved chemicals from the roofing, storage, and conveyance materials, together with the suspended particulate matter from the airborne, are examples of water contamination. In this work, the water quality monitoring system has been designed and implemented. Chemical and physical parameters of water samples were collected from three locations using a data acquisition (DAQ) system and rainwater quality was analyzed using… More >

Lucio Nobile^*

Structural Durability & Health Monitoring, Vol.17, No.5, pp. 353-368, 2023, DOI:10.32604/sdhm.2023.028247

Abstract The frequent occurrence of seismic events in Italy poses a strategic problem that involves either the culture of preservation of historical heritage or the civil protection action aimed to reduce the risk to people and goods (buildings, bridges, dams, slopes, etc.). Most of the Italian architectural heritage is vulnerable to earthquakes, identifying the vulnerability as the inherent predisposition of the masonry building to suffer damage and collapse during an earthquake. In fact, the structural concept prevailing in these ancient masonry buildings is aimed at ensuring prevalent resistance to vertical gravity loads. Rarely do these ancient masonry structures offer relevant resistance… More >

Wen-Tsai Sung¹, Indra Griha Tofik Isa^1,2, Sung-Jung Hsiao^3,*

CMC-Computers, Materials & Continua, Vol.76, No.2, pp. 2179-2200, 2023, DOI:10.32604/cmc.2023.041022

Abstract Indonesia is a producer in the fisheries sector, with production reaching 14.8 million tons in 2022. The production potential of the fisheries sector can be optimally optimized through aquaculture management. One of the most important issues in aquaculture management is how to efficiently control the fish pond water conditions. IoT technology can be applied to support a fish pond aquaculture monitoring system, especially for catfish species (Siluriformes), in real-time and remotely. One of the technologies that can provide this convenience is the IoT. The problem of this study is how to integrate IoT devices with Firebase’s cloud data system to… More >

Alaa Omran Almagrabi^*

CMC-Computers, Materials & Continua, Vol.76, No.2, pp. 2079-2093, 2023, DOI:10.32604/cmc.2023.039683

Abstract A potential concept that could be effective for multiple applications is a “cyber-physical system” (CPS). The Internet of Things (IoT) has evolved as a research area, presenting new challenges in obtaining valuable data through environmental monitoring. The existing work solely focuses on classifying the audio system of CPS without utilizing feature extraction. This study employs a deep learning method, CNN-LSTM, and two-way feature extraction to classify audio systems within CPS. The primary objective of this system, which is built upon a convolutional neural network (CNN) with Long Short Term Memory (LSTM), is to analyze the vocalization patterns of two different… More >

Anas Bilal^1,*, Xiaowen Liu¹, Haixia Long^1,*, Muhammad Shafiq², Muhammad Waqar³

CMC-Computers, Materials & Continua, Vol.76, No.2, pp. 2401-2426, 2023, DOI:10.32604/cmc.2023.037857

Abstract Farming is cultivating the soil, producing crops, and keeping livestock. The agricultural sector plays a crucial role in a country’s economic growth. This research proposes a two-stage machine learning framework for agriculture to improve efficiency and increase crop yield. In the first stage, machine learning algorithms generate data for extensive and far-flung agricultural areas and forecast crops. The recommended crops are based on various factors such as weather conditions, soil analysis, and the amount of fertilizers and pesticides required. In the second stage, a transfer learning-based model for plant seedlings, pests, and plant leaf disease datasets is used to detect… More >

Hao Yao¹, Shuzhen Chen^2,*

International Journal of Mental Health Promotion, Vol.25, No.9, pp. 1053-1065, 2023, DOI:10.32604/ijmhp.2023.028844

Abstract In the context of the COVID-19 pandemic and under the pressure of high competitiveness for higher education in China, junior high school students’ mental health is facing greater challenges. Understanding the time allocation of study and sleep is necessary for developing effective prevention and treatment programs. Based on a survey of 31,057 junior high school students in 47 junior high schools in Gansu Province, mainland China, the study analyzed the associations of time spent on study and sleep with anxiety and depressive symptoms among junior high school students through chi-square test, ANOVA, logistic regression model and threshold regression model. It… More >