Fithry Mohd Amir^*, Mohd Zamri Yusoff, Saiful Hasmady Abu Hassan

Frontiers in Heat and Mass Transfer, Vol.18, pp. 1-15, 2022, DOI:10.5098/hmt.18.27

Abstract Nanofluid film on a horizontal tube is investigated numerically on the circular and multi-faceted cylinder. The fluid flow characteristics, including film thickness, shear stress, and thermal performance, are observed and analyzed. Fluid film on the circular surface is typical in many engineering applications, but the study of nanofluid film on non-circular surface is deficient in literature. The study provides a numerical model of a multi-faceted cylinder to simulate the nanofluid film on the non-circular surfaces using a volume of fluid (VOF) method. The ratio of Brownian motion to thermophoretic diffusion, N_BT developed along the film thickness in phases, in which… More >

Suraj Shembekar^*, Dhananjay Zodpe, Pramod Padole

Molecular & Cellular Biomechanics, Vol.19, No.4, pp. 165-175, 2022, DOI:10.32604/mcb.2022.021513

Abstract Arteriovenous fistula (AVF) is the endorsed method of vascular access for hemodialysis in end-stage renal disease (ESRD). However, more than 60% of AVF fail to mature for hemodialysis. Intimal hyperplasia leads to stenosis is the primary cause of fistula failure. Wall shear stress (WSS) is one of the important parameters that enact a crucial role in building of intimal hyperplasia. The prime purpose of this research work is to investigate the effect of anastomosis angle on WSS, pressure drop, venous outflow rate and identify the optimal angle of anastomosis of AVF, so that it helps to standardize the surgical technique.… More >

Lisheng Luo^1,*, Xinran Xie¹, Yongqiang Zhang¹, Xiaofeng Zhang², Xinyue Cui¹

Journal of Renewable Materials, Vol.11, No.2, pp. 791-809, 2023, DOI:10.32604/jrm.2022.022539

Abstract Traditional methods focus on the ultimate bending moment of glulam beams and the fracture failure of materials with defects, which usually depends on empirical parameters. There is no systematic theoretical method to predict the stiffness and shear distribution of glulam beams in elastic-plastic stage, and consequently, the failure of such glulam beams cannot be predicted effectively. To address these issues, an analytical method considering material nonlinearity was proposed for glulam beams, and the calculating equations of deflection and shear stress distribution for different failure modes were established. The proposed method was verified by experiments and numerical models under the corresponding… More > Graphic Abstract

Qingzhuo Chi¹, Huimin Chen¹, Shiqi Yang¹, Lizhong Mu^1,*, Changjin Ji², Ying He¹, Yong Luan³

CMES-Computer Modeling in Engineering & Sciences, Vol.131, No.1, pp. 31-47, 2022, DOI:10.32604/cmes.2022.018286

Abstract Cardiovascular computational fluid dynamics (CFD) based on patient-specific modeling is increasingly used to predict changes in hemodynamic parameters before or after surgery/interventional treatment for aortic dissection (AD). This study investigated the effects of flow boundary conditions (BCs) on patient-specific aortic hemodynamics. We compared the changes in hemodynamic parameters in a type A dissection model and normal aortic model under different BCs: inflow from the auxiliary and truncated structures at aortic valve, pressure control and Windkessel model outflow conditions, and steady and unsteady inflow conditions. The auxiliary entrance remarkably enhanced the physiological authenticity of numerical simulations of flow in the ascending… More >

Dolat Khan¹, Gohar Ali¹, Arshad Khan², Ilyas Khan^3,*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 1025-1034, 2022, DOI:10.32604/cmc.2022.012635

Abstract The basic objective of this work is to study the heat transfer of Casson fluid of non-Newtonian nature. The fluid is considered over a vertical plate such that the plate exhibits arbitrary wall shear stress at the boundary. Heat transfers due to exponential plate heating and natural convection are due to buoyancy force. Magnetohydrodynamic (MHD) analysis in the occurrence of a uniform magnetic field is also considered. The medium over the plate is porous and hence Darcy’s law is applied. The governing equations are established for the velocity and temperature fields by the usual Boussinesq approximation. The problem is first… More >

HUAN YIN¹, LIZHEN WANG¹, YUBO FAN¹, BINGMEI M. FU^1,2,*

BIOCELL, Vol.45, No.5, pp. 1187-1199, 2021, DOI:10.32604/biocell.2021.016650

Abstract Primary cilium is an antenna-like and non-motile structure protruding from the apical surface of most mammalian cells including endothelial cells lining the inner side of all the blood vessels in our body. Although it has been over a century since primary cilia were discovered, the investigation about their mechano-sensing and other roles in maintaining normal functions of cardiovascular system has just started in recent years. This focused review aims to give an update about the current literature for the role of endothelial primary cilia in blood flow mechano-sensing and shear stress-shielding. To do this, we first summarized the characteristic features… More >

Tantan Zhu¹, Da Huang^2,3,*, Jianxun Chen¹, Yanbin Luo¹, Longfei Xu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 79-97, 2021, DOI:10.32604/cmes.2021.014808

Abstract Excavation and earth surface processes (e.g., river incision) always induce the unloading of stress, which can cause the failure of rocks. To study the shear mechanical behavior of a rock sample under unloading normal stress conditions, a new stress path for direct shear tests was proposed to model the unloading of stress caused by excavation and other processes. The effects of the initial stresses (i.e., the normal stress and shear stress before unloading) on the shear behavior and energy conversion were investigated using laboratory tests and numerical simulations. The shear strength of a rock under constant stress or under unloading… More >

Mohamad Shukri Zakaria^1,*, Haslina Abdullah², Azmi Nordin¹, Syazwati Ahmad Zaki¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 171-179, 2021, DOI:10.32604/fdmp.2021.010974

Abstract This study deals with the interaction of blood flow with the wall aorta, i.e., the boundary of the main artery that transports blood in the human body. The problem is addressed in the framework of computational fluid dynamics complemented with (FSI), i.e., a fluid-structure interaction model. Two fundamental types of wall are considered, namely a flexible and a rigid boundary. The resulting hemodynamic flows are carefully compared in order to determine which boundary condition is more effective in reproducing reality. Special attention is paid to wall shear stress (WSS), a factor known for its ability to produce atherosclerosis and bulges.… More >

Basharat Ullah¹, Umar Khan¹, Hafiz Abdul Wahab¹, Ilyas Khan^2,*, Dumitru Baleanu^3,4,5, Kottakkaran Sooppy Nisar⁶

CMC-Computers, Materials & Continua, Vol.66, No.1, pp. 947-960, 2021, DOI:10.32604/cmc.2020.012430

Abstract The investigation of Thermal performance in nanofluids and hybrid nanofluids over a curved stretching infinite region strengthens its roots in engineering and industry. Therefore, the comparative thermal analysis in SiO₂–H₂O and (MoS₂–SiO₂)–H₂O is conducted over curved stretching surface. The model is reduced in the dimensional version via similarity transformation and then treated numerically. The velocity and thermal behavior for both the fluids is decorated against the preeminent parameters. From the analysis, it is examined that the motion of under consideration fluids declines against Fr and λ. The thermal performance enhances for higher volumetric fraction and λ. Further, it is noticed… More >

KHAWAR ALI SHAHZAD^1,2,#, ZHONGJIE QIN^3,4,#, YAN LI^1,2,*, DELIN XIA^3,4,*

BIOCELL, Vol.44, No.2, pp. 137-145, 2020, DOI:10.32604/biocell.2020.08500

Abstract Focal adhesions are polyproteins linked to extracellular matrix and cytoskeleton, which play an important role in the process of transforming force signals into intracellular chemical signals and subsequently triggering related physiological or pathological reactions. The cytoskeleton is a network of protein fibers in the cytoplasm, which is composed of microfilaments, microtubules, intermediate filaments, and cross-linked proteins. It is a very important structure for cells to maintain their basic morphology. This review summarizes the process of fluid shear stress transduction mediated by focal adhesion and the key role of the cytoskeleton in this process, which focuses on the focal adhesion and… More >