Ruilong Chen¹, Guangfu Zeng¹, Ke Wang², Lei Luo^1,*, Zhiping Cai¹

Journal on Internet of Things, Vol.2, No.2, pp. 55-64, 2020, DOI:10.32604/jiot.2020.09814

Abstract Smoking is the main reason for fire disaster and pollution in petrol station, construction site and warehouse. Existing solutions based on wearable devices and smoking sensors were costly and hard to obtain evidence of smoking in unmanned scenarios. With the developments of closed circuit television (CCTV) system, vision-based methods for object detection, mostly driven by deep learning techniques, were introduced recently. However, the massive GPU computing hardware required by the deep learning algorithm made these methods hard to be deployed. This paper aims at solving the smoking detection problem on edge and proposes the solution that has fast detection speed,… More >

Caifeng Cheng^1,2, Deshu Lin^3,*

Journal on Internet of Things, Vol.2, No.1, pp. 47-54, 2020, DOI:10.32604/jiot.2020.09117

Abstract In this paper, the observation matrix and reconstruction algorithm of compressed sensing sampling theorem are studied. The advantages and disadvantages of greedy reconstruction algorithm are analyzed. The disadvantages of signal sparsely are preset in this algorithm. The sparsely adaptive estimation algorithm is proposed. The compressed sampling matching tracking algorithm supports the set selection and culling atomic standards to improve. The sparse step size adaptive compressed sampling matching tracking algorithm is proposed. The improved algorithm selects the sparsely as the step size to select the support set atom, and the maximum correlation value. Half of the threshold culling algorithm supports the… More >

Caifeng Cheng^1,2, Deshu Lin^3,*

Journal on Internet of Things, Vol.2, No.1, pp. 37-45, 2020, DOI:10.32604/jiot.2020.09116

Abstract Compressive sensing theory mainly includes the sparsely of signal processing, the structure of the measurement matrix and reconstruction algorithm. Reconstruction algorithm is the core content of CS theory, that is, through the low dimensional sparse signal recovers the original signal accurately. This thesis based on the theory of CS to study further on seismic data reconstruction algorithm. We select orthogonal matching pursuit algorithm as a base reconstruction algorithm. Then do the specific research for the implementation principle, the structure of the algorithm of AOMP and make the signal simulation at the same time. In view of the OMP algorithm reconstruction… More >

Lei Sun¹, Ling Tan^1,*, Wenjie Ma¹, Jingming Xia²

Journal on Internet of Things, Vol.2, No.1, pp. 23-35, 2020, DOI:10.32604/jiot.2020.09075

Abstract In recent years, WiFi indoor positioning technology has become a hot research topic at home and abroad. However, at present, indoor positioning technology still has many problems in terms of practicability and stability, which seriously affects the accuracy of indoor positioning and increases the complexity of the calculation process. Aiming at the instability of RSS and the more complicated data processing, this paper proposes a low-frequency filtering method based on fast data convergence. Low-frequency filtering uses MATLAB for data fitting to filter out low-frequency data; data convergence combines the mean and multi-data parallel analysis process to achieve a good balance… More >

Peng Xu, Jianwei Zhang^*

Journal on Internet of Things, Vol.2, No.1, pp. 13-21, 2020, DOI:10.32604/jiot.2020.09073

Abstract Nonlocal property is an important feature of natural images, which means that the patch matrix formed by similar image patches is low-rank. Meanwhile, learning good image priors is of great importance for image denoising. In this paper, we combine the image self-similarity with EPLL (Expected patch log likelihood) method, and propose an EPLL denoising model based on internal and external image similarity to improve the preservation of image details. The experiment results show that the validity of our method is proved from two aspects of visual and numerical results. More >

Ke Jin, Shunfeng Wang^*

Journal on Internet of Things, Vol.2, No.1, pp. 1-11, 2020, DOI:10.32604/jiot.2020.09071

Abstract In recent years, image restoration has become a huge subject, and finite hybrid model has been widely used in image denoising because of its easy modeling and strong explanatory results. The gaussian mixture model is the most common one. The existing image denoising methods usually assume that each component of the natural image is subject to the gaussian mixture model (GMM). However, this approach is not entirely reasonable. It is well known that most natural images are complex and their distribution is not entirely gaussian. As a result, there are still many problems that GMM cannot solve. This paper tries… More >

Yong Hua¹,Bolun Chen^1,2,∗,Yan Yuan¹, Guochang Zhu¹, Fenfen Li¹

Journal on Internet of Things, Vol.1, No.2, pp. 77-88, 2019, DOI:10.32604/jiot.2019.05941

Abstract The problem of influence maximization in the social network G is to find k seed nodes with the maximum influence. The seed set S has a wider range of influence in the social network G than other same-size node sets. The influence of a node is usually established by using the IC model (Independent Cascade model) with a considerable amount of Monte Carlo simulations used to approximate the influence of the node. In addition, an approximate effect (1-1/e) is obtained, when the number of Monte Carlo simulations is 10000 and the probability of propagation is very small. In this paper,… More >

Weiwei Liu^{1, *}, Yang Tang², Fei Yang², Jin Wang³

Journal on Internet of Things, Vol.1, No.2, pp. 71-76, 2019, DOI:10.32604/jiot.2019.05946

Abstract Carbon monoxide (CO) is harmful to our health, and even causes death. The main source of CO is automobile exhaust. Therefore, this article determines that CO is the emission factor, and finally the evaluation model is established. The model provides an important basis for the highway construction project design, traffic management, environmental pollution control, energy saving, environmental evaluation and so on. Compared with the traditional method that calculates the road traffic volume through the air emissions model, according to the total amount of air pollution control, this paper builds the emission diffusion model, which calculates the road traffic volume by… More >

Xiaorong Zhao¹, Hongjin Zhu¹, Xiufang Qian^1,*, Chunpeng Ge²

Journal on Internet of Things, Vol.1, No.2, pp. 55-62, 2019, DOI:10.32604/jiot.2019.06315

Abstract In recent years, with the rapid development of China’s economy and the continuous improvement of people’s living standards, the number of motor vehicles and the number of drivers in the country have grown rapidly. Due to the increase in the number of vehicles and the number of motorists, the traffic accident rate is increasing, causing serious economic losses to society. According to the traffic accident statistics of the Ministry of Communications of China in 2009, more than 300,000 car accidents occurred in the year, most of which were caused by drunk driving. Therefore, this paper proposes a design scheme based… More >

Yanpeng Wu¹, Xiaoqi Peng^1,*, Nur Mohammad²

Journal on Internet of Things, Vol.1, No.2, pp. 63-69, 2019, DOI:10.32604/jiot.2019.06111

Abstract The dosage of gold-antimony flotation process of 5 main drugs, including Copper Sulfate, Lead Nitrate, Yellow Medicine, No. 2 Oil, Black Medicine, with corresponding visual features of foam images, including Stability, Gray Scale, Mean R, Mean G, Mean B, Mean Average, Dimension and Degree Variance, were recorded. Parameter correlation analysis showed that the correlation among Copper Sulfate, Yellow Medicine, Black Medicine, as well as the correlation among Gray Scale, Mean R, Mean G, Mean B, is strong, and the correlation among Dimension, Gray Scale, Mean R, Mean G, Mean B, as well as the correlation between Stability and each dosing… More >