Pengfei Guan¹, Ping Li², Yiqiang Wu¹, Xingong Li¹, Guangming Yuan¹, Yingfeng Zuo^1,*

Journal of Renewable Materials, Vol.10, No.9, pp. 2451-2463, 2022, DOI:10.32604/jrm.2022.020459

Abstract To enhance mechanical properties and improve flame retardancy and smoke suppression of fast-growing poplar wood in wood applications, the wood was impregnated and modified. An organic phenolic prepolymer and inorganic sodium silicate was used as contrasting impregnation modifiers and wood samples were impregnated by a bionic “respiration” method with alternating positive and negative pressure. The weight percentage gain, density increase ratio, mechanical properties (bending and compressive strength and hardness), and water absorption rate of inorganic and organic-impregnated modified poplar wood (IIMPW and OIMPW, respectively) were compared and these properties in IIMPW were found to be higher than those of OIMPW… More >

Yatim Lailun Ni’mah^*, Suprapto Suprapto, Harmami, Ita Ulfin, Puput Asmaul Fauziyah

Journal of Renewable Materials, Vol.10, No.9, pp. 2365-2376, 2022, DOI:10.32604/jrm.2022.020001

Abstract Capsule shells have been successfully fabricated from water-soluble chitosan (WSC) with the addition of alginate and Gembili starch. WSC was synthesized from crab shell chitosan by depolymerization reaction. The capsule shells were made with the composition of WSC: Alginate, 2:1, 3:1 and 4:1 (w/w) with and without the addition of Gembili starch. Gembili starch was added with a ratio of Alginate: Starch, 1:1 (w/w). The capsule shell properties were evaluated according to Indonesian Pharmacopoeia standard. The solubility test showed that the capsule shells were comply with the standard. The highest degrees of swelling in water and HCl 0.1 N solution… More > Graphic Abstract

Mahmood Hameed Majeed^*, Nabeel Kadhem Abd Alsaheb

Journal of Renewable Materials, Vol.10, No.9, pp. 2391-2408, 2022, DOI:10.32604/jrm.2022.019887

Abstract Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease, injury, or congenital disabilities. Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs. These are utilized to attach the right cells and then grow them. Rapid prototyping appears to be the most promising technology due to its high level of precision and control. Bone tissue replacement “scaffolding” is a common theme discussed in this article. The fused deposition technique was used to construct our scaffold, and a polymer called polylactic acids and soybean oil resin were… More > Graphic Abstract

Xupeng Chen^1,*, Zhuowen Sun², Jianyong Pang¹

Journal of Renewable Materials, Vol.10, No.9, pp. 2489-2508, 2022, DOI: 10.32604/jrm.2022.019404

Abstract Mineral admixture concrete is a renewable material. It requires less cement than ordinary concrete and is thus beneficial for economical use of resources and environmental protection. To examine the impact of chloride salt on the durability of mineral admixture concrete under various conditions, in this study, test blocks are divided into two major groups: in one group, the test block is eroded by chloride salt on the interior and by sulphate/ magnesium salts on the exterior, and in the second group, the test block is eroded by external chloride/sulphate/ magnesium salts. Clean water is considered the control group. Dry-wet alternation… More > Graphic Abstract

Junlong Yao^1,2, Wei Nie¹, Zhengguang Sun², Huan Yang^1,3,*, Yu Guan¹, Lin Gao⁴, Xueliang Jiang¹, Mujie Guo¹, Chuanxi Xiong^5,*

Journal of Renewable Materials, Vol.10, No.9, pp. 2355-2364, 2022, DOI:10.32604/jrm.2022.019339

Abstract In general, self-healing dielectric composites are mainly composed of polar hydrogen bonds, which have high hydrophilicity and are unsuitable for humid environment. Dielectric composite with Diels-Alder (D-A) bond contains covalent bonds, it can be adopted as an efficient self-healing material. Here, we construct self-healing barium titanate (BT)/polyurethane (PU) dielectric composites by adopting PU with D-A bond as matrix (BT/ PU-DA). The prepared 10% BT/PU-DA composite exhibits superior self-healing ability than that of PU-DA. Moreover, its dielectric constant can reach 9.3 with a loss of only 0.04 at 1000 Hz and maintain 93% repair effi- ciency of tensile strength. The experimental… More >

Piyush Kumar Gupta¹, D. Karthik Kumar², M. Thaveena³, Soumya Pandit¹, Somya Sinha⁴, R. Ranjithkumar^2,* , Walaa F. Alsanie⁵, Vijay Kumar Thakur^6,7,8,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3093-3105, 2022, DOI:10.32604/jrm.2022.019335

Abstract Custard apple is a dry land fruit. Its leaves exhibit different pharmacological activities. In the present study, both silver (Ag) nanoparticles and chitosan-coated Ag (Chi-Ag) nanoparticles were fabricated using the aqueous leaf extract of the custard apple plant. During preliminary phytochemical analysis, various types of phytocompounds were found in the aqueous leaf extract of the same plant. Next, both nanoparticles were physiochemically characterized. FTIR analysis exhibited the fingerprint vibrational peaks of active bioactive compounds in plant extract, Ag nanoparticles, and Chi-Ag nanoparticles. UV/Visible spectral analysis revealed the highest absorbance peak at 419 nm, indicating the presence of Ag nanoparticles. XRD… More > Graphic Abstract

Soliman Abdalla^1,2,*, Sherif Kandil², Waleed El-Shirbeeny¹, Fatma Bahabri^1,3

Journal of Renewable Materials, Vol.10, No.9, pp. 2335-2354, 2022, DOI:10.32604/jrm.2022.021211

Abstract Diabetes disorder turns smoothly to be a global epidemic disorder and the glycated hemoglobin (HbA1c) starts to be an efficient marker of it. The dielectric spectroscopy on different human normal- and diabetic-blood samples is used to characterize and to estimate the HbA1c concentration. “dc-” and ac-measurement of the complex conductivity in the temperature range from 280 K up to 320 K, and in the frequency range from one Hz up to 32 MHz have been performed. The thermal activation energy, ΔE_σ, of dc-electric conductivity lies in the range 95 meV < ΔE_σ < 115 meV; while the thermal activation energy,… More >

Ningli An¹, Jingxuan Qin¹, Xing Zhou¹, Quandai Wang², Changqing Fang^1,*, Jiapeng Guo², Bin Nan²

Journal of Renewable Materials, Vol.10, No.9, pp. 2319-2334, 2022, DOI:10.32604/jrm.2022.021030

Abstract Flexible sensors are attractive due to potential applications in body exercise and ambient gas monitoring systems. Cellulose and its derivatives have combined superiorities such as intrinsic and structural flexibility, ease of chemical functionalization, moisture sensitivity, and mechanical stability, enabling them to be promising candidates as flexible supporting substrates and flexible sensitive materials. Significant progress consequently has been achieved to improve mechanical, electrical, and chemical performance. The latest advance in materials synthesis, structure design, fabrication control, and working mechanism of novel cellulose-based flexible sensors are reviewed and discussed, including strain sensors, humidity sensors, and harmful gas sensors. Various strategies were summarized… More > Graphic Abstract

Xiaoyong Wang^*

Journal of Renewable Materials, Vol.10, No.9, pp. 2431-2450, 2022, DOI:10.32604/jrm.2022.020829

Abstract Metakaolin is a highly reactive pozzolanic material that is widely utilized for enhancing the performance of concrete. This study offers a framework for the mixture design of sustainable metakaolin-modified concrete with low CO₂ emissions and low costs. Different design strengths after 28 days are first formulated, with values such as 30, 40, 50, and 60 MPa. A genetic algorithm is then used to determine the optimal mixtures. Minimized CO₂ and cost are set as the aims of the genetic algorithm. The strength of the concrete, its workability (slump), and carbonation service life with climate change are set as constraints of the… More >

Xianling Fu^#, Hongliang Ding^#, Xin Wang^*, Lei Song, Yuan Hu^*

Journal of Renewable Materials, Vol.10, No.9, pp. 2303-2317, 2022, DOI:10.32604/jrm.2022.020759

Abstract Although epoxy resin has been widely used in various fields, it still suffers from some problems including brittleness and flammability. In this study, a new phosphonic acid, N, N-bis(phosphomethyl) glycine (GDMP), was prepared by Mannich reaction with bio-based glycine and then a novel layered zirconium phosphonate (ZrGDMP) was synthesized using GDMP and zirconyl chloride hydrate as reactants. The chemical structure of ZrGDMP was well characterized by ¹H and ³¹P NMR, SEM, XRD and XPS. The effect of ZrGDMP on the flame retardancy, smoke suppression, strengthening and toughening performances of the epoxy matrix was investigated and evaluated. TGA results indicated that… More > Graphic Abstract