Krishnan Muthumayil^1,*, Thangaiyan Jayasankar², Nagappan Krishnaraj³, Mohamed Yacin Sikkandar⁴, Prakash Nattanmai Balasubramanian⁵, Chokkalingam Bharatiraja⁶

Intelligent Automation & Soft Computing, Vol.27, No.3, pp. 771-784, 2021, DOI:10.32604/iasc.2021.012462

Abstract Wireless Multimedia Sensor Networks (WMSN) provides valuable information for scalar data, images, audio, and video processing in monitoring and surveillance applications. Multimedia streaming, however, is highly challenging for networks as energy restriction sensor nodes limit the potential data transmission bandwidth and lead to reduced throughput. WMSN’s two key design challenges, which can be achieved by the clustering process, are energy efficiency and throughput maximization. The use of the clustering technique helps to organise the sensor nodes into clusters, and between each cluster a cluster head (CH) will be chosen. This paper introduces a new Artificial Fish Swarm Optimization Algorithm (AFSA)… More >

Maryam Shafiq¹, Humaira Ashraf¹, Ata Ullah², Mehedi Masud³, Muhammad Azeem², N. Z. Jhanjhi^4,*, Mamoona Humayun⁵

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 3505-3521, 2021, DOI:10.32604/cmc.2021.015533

Abstract The Internet of Things (IoT) is gaining attention because of its broad applicability, especially by integrating smart devices for massive communication during sensing tasks. IoT-assisted Wireless Sensor Networks (WSN) are suitable for various applications like industrial monitoring, agriculture, and transportation. In this regard, routing is challenging to find an efficient path using smart devices for transmitting the packets towards big data repositories while ensuring efficient energy utilization. This paper presents the Robust Cluster Based Routing Protocol (RCBRP) to identify the routing paths where less energy is consumed to enhances the network lifespan. The scheme is presented in six phases to… More >

Adeeb Salh¹, Lukman Audah^1,*, Qazwan Abdullah¹, Nor Shahida M. Shah², Shipun A. Hamzah¹, Shahilah Nordin³, Nabil Farah²

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 3189-3214, 2021, DOI:10.32604/cmc.2021.014746

Abstract Energy efficiency (EE) is a critical design when taking into account circuit power consumption (CPC) in fifth-generation cellular networks. These problems arise because of the increasing number of antennas in massive multiple-input multiple-output (MIMO) systems, attributable to inter-cell interference for channel state information. Apart from that, a higher number of radio frequency (RF) chains at the base station and active users consume more power due to the processing activities in digital-to-analogue converters and power amplifiers. Therefore, antenna selection, user selection, optimal transmission power, and pilot reuse power are important aspects in improving energy efficiency in massive MIMO systems. This work… More >

Abdul Rehman Javed^1,*, Rabia Abid², Bakhtawar Aslam², Hafiza Ammara Khalid², Mohammad Zubair Khan³, Omar H. Alhazmi³, Muhammad Rizwan²

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 1933-1950, 2021, DOI:10.32604/cmc.2021.015272

Abstract With the popularity of green computing and the huge usage of networks, there is an acute need for expansion of the 5G network. 5G is used where energy efficiency is the highest priority, and it can play a pinnacle role in helping every industry to hit sustainability. While in the 5G network, conventional performance guides, such as network capacity and coverage are still major issues and need improvements. Device to Device communication (D2D) communication technology plays an important role to improve the capacity and coverage of 5G technology using different techniques. The issue of energy utilization in the IoT based… More >

Hima Bindu Valiveti^1,*, SNV Ganesh², Budati Anil Kumar¹, Dileep Kumar Yadav³

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 2049-2059, 2021, DOI:10.32604/cmc.2021.014690

Abstract A major problem in networking has always been energy consumption. Battery life is one parameter which could help improve Energy Efficiency. Existing research on wireless networking stresses on reducing signaling messages or time required for data transfer for addressing energy consumption issues. Routing or Forwarding packets in a network between the network elements like routers, switches, wireless access points, etc., is complex in conventional networks. With the advent of Software Defined Networking (SDN) for 5G network architectures, the distributed networking has embarked onto centralized networking, wherein the SDN Controller is responsible for decision making. The controller pushes its decision onto… More >

R. Jayamala^*, A. Valarmathi

Intelligent Automation & Soft Computing, Vol.27, No.2, pp. 347-358, 2021, DOI:10.32604/iasc.2021.012401

Abstract Cloud computing is an increasingly important technology to deliver pay-as-you-go online computing services. In this study, the cloud service provider permits the cloud user to pay according to the user’s needs. Various methods have been used to reduce energy utilization in the cloud. The rapid increase of cloud users has led to increased energy consumption and higher operating costs for cloud providers. A key issue in cloud data centers is their massive energy consumption to operate and maintain computing services. Virtual machine (VM) migration is a method to reduce energy consumption. This study proposes enhanced decentralized virtual machine migration (EDVMM),… More >

Abdulfattah Noorwali¹, Muhammad Awais Javed², Mohammad Zubair Khan^3,*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 463-476, 2021, DOI:10.32604/cmc.2021.014668

Abstract Unmanned Ariel Vehicles (UAVs) are flying objects whose trajectory can be remotely controlled. UAVs have lot of potential applications in the areas of wireless communications, internet of things, security, traffic management, monitoring, and smart surveying. By enabling reliable communication between UAVs and ground nodes, emergency notifications can be efficiently and quickly disseminated to a wider area. UAVs can gather data from remote areas, industrial units, and emergency scenarios without human involvement. UAVs can support ubiquitous connectivity, green communications, and intelligent wireless resource management. To efficiently use UAVs for all these applications, important challenges need to be investigated. In this paper,… More >

Mohammad Aldossary^*

Computer Systems Science and Engineering, Vol.36, No.2, pp. 353-368, 2021, DOI:10.32604/csse.2021.014974

Abstract With the expansion of cloud computing, optimizing the energy efficiency and cost of the cloud paradigm is considered significantly important, since it directly affects providers’ revenue and customers’ payment. Thus, providing prediction information of the cloud services can be very beneficial for the service providers, as they need to carefully predict their business growths and efficiently manage their resources. To optimize the use of cloud services, predictive mechanisms can be applied to improve resource utilization and reduce energy-related costs. However, such mechanisms need to be provided with energy awareness not only at the level of the Physical Machine (PM) but… More >

G. Kadiravan¹, P. Sujatha¹, T. Asvany¹, R. Punithavathi², Mohamed Elhoseny³, Irina V. Pustokhina⁴, Denis A. Pustokhin⁵, K. Shankar^6,*

CMC-Computers, Materials & Continua, Vol.66, No.3, pp. 3215-3231, 2021, DOI:10.32604/cmc.2021.013034

Abstract Nowadays, healthcare applications necessitate maximum volume of medical data to be fed to help the physicians, academicians, pathologists, doctors and other healthcare professionals. Advancements in the domain of Wireless Sensor Networks (WSN) and Multimedia Wireless Sensor Networks (MWSN) are tremendous. M-WMSN is an advanced form of conventional Wireless Sensor Networks (WSN) to networks that use multimedia devices. When compared with traditional WSN, the quantity of data transmission in M-WMSN is significantly high due to the presence of multimedia content. Hence, clustering techniques are deployed to achieve low amount of energy utilization. The current research work aims at introducing a new… More >

Piyanut Saengsikhiao¹, Juntakan Taweekun^1,2,*, Kittinan Maliwan², Somchai Sae-ung², Thanansak Theppaya²

Energy Engineering, Vol.118, No.2, pp. 411-433, 2021, DOI:10.32604/EE.2021.012860

Abstract This paper presents the improvement of eco-friendly and power consumption saving refrigerants for refrigeration systems. The novel azeotropic refrigerant mixtures of HFCs and HCs can replace refrigeration systems, and using the R134, R32, R125, and R1270 refrigerants in several compositions found using the decision tree function of the RapidMiner software (which came first in the KDnuggets annual software poll). All refrigerant results are mixed of POE, which is A1 classification refrigerant, non-flammable, and innocuous refrigerant, and using REFPROP software and CYCLE_D-HX software are under the CAN/ANSI/AHRI540 standards. The boiling point of the new refrigerant mix R-No.595 is 4.58%, lower than… More >