Yongning Yuan¹, Dong Zhang², Usama Sayed³, Hao Zhu¹, Jun Wang⁴, Xiaojun Yang², Zheng Wang^2,*

Journal of Renewable Materials, Vol.11, No.11, pp. 3917-3932, 2023, DOI:10.32604/jrm.2023.028764

Abstract In order to optimize the wood internal quality detection and evaluation system and improve the comprehensive utilization rate of wood, this paper invented a set of log internal defect detection and visualization system by using the ultrasonic dry coupling agent method. The detection and visualization analysis of internal log defects were realized through log specimen test. The main conclusions show that the accuracy, reliability and practicability of the system for detecting the internal defects of log specimens have been effectively verified. The system can make the edge of the detected image smooth by interpolation algorithm, and the edge detection algorithm… More >

Youping Lin¹, Huangbin Lin^2,*, Dezhi Wei¹

Intelligent Automation & Soft Computing, Vol.37, No.2, pp. 1363-1379, 2023, DOI:10.32604/iasc.2023.038601

Abstract The digital twin (DT) includes real-time data analytics based on the actual product or manufacturing processing parameters. Data from digital twins can predict asset maintenance requirements ahead of time. This saves money by decreasing operating expenses and asset downtime, which improves company efficiency. In this paper, a digital twin in braiding machinery based on IoT (DTBM-IoT) used to diagnose faults. When an imbalance fault occurs, the system gathers experimental data. After that, the information is sent into a digital win model of the rotor system to see whether it can quantify and locate imbalance for defect detection. It is possible… More >

Nadeem Jabbar Chaudhry^1,*, M. Bilal Khan², M. Javaid Iqbal¹, Siddiqui Muhammad Yasir³

Journal on Artificial Intelligence, Vol.4, No.4, pp. 245-259, 2022, DOI:10.32604/jai.2022.038875

Abstract Recently, outstanding identification rates in image classification tasks were achieved by convolutional neural networks (CNNs). to use such skills, selective CNNs trained on a dataset of well-known images of metal surface defects captured with an RGB camera. Defects must be detected early to take timely corrective action due to production concerns. For image classification up till now, a model-based method has been utilized, which indicated the predicted reflection characteristics of surface defects in comparison to flaw-free surfaces. The problem of detecting steel surface defects has grown in importance as a result of the vast range of steel applications in end-product… More >

Hyunkyu Shin¹, Yonghan Ahn², Mihwa Song³, Heungbae Gil³, Jungsik Choi^4,*, Sanghyo Lee^5,*

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 4753-4766, 2023, DOI:10.32604/cmc.2023.038362

Abstract Recently, convolutional neural network (CNN)-based visual inspection has been developed to detect defects on building surfaces automatically. The CNN model demonstrates remarkable accuracy in image data analysis; however, the predicted results have uncertainty in providing accurate information to users because of the “black box” problem in the deep learning model. Therefore, this study proposes a visual explanation method to overcome the uncertainty limitation of CNN-based defect identification. The visual representative gradient-weights class activation mapping (Grad-CAM) method is adopted to provide visually explainable information. A visualizing evaluation index is proposed to quantitatively analyze visual representations; this index reflects a rough estimate… More >

Min Zhang^*, Haixu Xi

Computer Systems Science and Engineering, Vol.46, No.3, pp. 3911-3923, 2023, DOI:10.32604/csse.2023.036709

Abstract For Printed Circuit Board (PCB) surface defect detection, traditional detection methods mostly focus on template matching-based reference method and manual detections, which have the disadvantages of low defect detection efficiency, large errors in defect identification and localization, and low versatility of detection methods. In order to further meet the requirements of high detection accuracy, real-time and interactivity required by the PCB industry in actual production life. In the current work, we improve the You-only-look-once (YOLOv4) defect detection method to train and detect six types of PCB small target defects. Firstly, the original Cross Stage Partial Darknet53 (CSPDarknet53) backbone network is… More >

Abdullah Ahmed Al-Dulaimi^1,*, Muhammet Tahir Guneser¹, Alaa Ali Hameed², Mohammad Shukri Salman³

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.3, pp. 2291-2319, 2023, DOI:10.32604/cmes.2023.026065

Abstract Recently, the demand for renewable energy has increased due to its environmental and economic needs. Solar panels are the mainstay for dealing with solar energy and converting it into another form of usable energy. Solar panels work under suitable climatic conditions that allow the light photons to access the solar cells, as any blocking of sunlight on these cells causes a halt in the panels work and restricts the carry of these photons. Thus, the panels are unable to work under these conditions. A layer of snow forms on the solar panels due to snowfall in areas with low temperatures.… More > Graphic Abstract

Siddiqui Muhammad Yasir¹, Hyunsik Ahn^2,*

CMC-Computers, Materials & Continua, Vol.75, No.1, pp. 1847-1861, 2023, DOI:10.32604/cmc.2023.035698

Abstract Deep learning has been constantly improving in recent years, and a significant number of researchers have devoted themselves to the research of defect detection algorithms. Detection and recognition of small and complex targets is still a problem that needs to be solved. The authors of this research would like to present an improved defect detection model for detecting small and complex defect targets in steel surfaces. During steel strip production, mechanical forces and environmental factors cause surface defects of the steel strip. Therefore, the detection of such defects is key to the production of high-quality products. Moreover, surface defects of… More >

Fengyu Xu^1,2, Masoud Kalantari³, Bangjian Li², Xingsong Wang^2,*

CMC-Computers, Materials & Continua, Vol.75, No.1, pp. 2209-2226, 2023, DOI:10.32604/cmc.2023.027102

Abstract The automatically defect detection method using vision inspection is a promising direction. In this paper, an efficient defect detection method for detecting surface damage to cables on a cable-stayed bridge automatically is developed. A mechanism design method for the protective layer of cables of a bridge based on vision inspection and diameter measurement is proposed by combining computer vision and diameter measurement techniques. A detection system for the surface damages of cables is de-signed. Images of cable surfaces are then enhanced and subjected to threshold segmentation by utilizing the improved local grey contrast enhancement method and the improved maximum correlation… More >

Qunbiao Wu¹, Zhen Wang^1,*, Haifeng Fang¹, Junji Chen¹, Xinfeng Wan²

Computer Systems Science and Engineering, Vol.46, No.1, pp. 961-979, 2023, DOI:10.32604/csse.2023.036239

Abstract For surface defects in electronic water pump shells, the manual detection efficiency is low, prone to misdetection and leak detection, and encounters problems, such as uncertainty. To improve the speed and accuracy of surface defect detection, a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods. In this method, the MobileNetV3 module replaces the backbone network of YOLOv5s, depth-separable convolution is introduced, the parameters and calculations are reduced, and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy. A dataset of electronic pump… More >

Qiang Zhi¹, Wanxu Pu¹, Jianguo Ren¹, Zhengshu Zhou^2,*

CMC-Computers, Materials & Continua, Vol.74, No.3, pp. 5141-5155, 2023, DOI:10.32604/cmc.2023.035846

Abstract In the early stage of software development, a software requirements specification (SRS) is essential, and whether the requirements are clear and explicit is the key. However, due to various reasons, there may be a large number of misunderstandings. To generate high-quality software requirements specifications, numerous researchers have developed a variety of ways to improve the quality of SRS. In this paper, we propose a questions extraction method based on SRS elements decomposition, which evaluates the quality of SRS in the form of numerical indicators. The proposed method not only evaluates the quality of SRSs but also helps in the detection… More >