Jianfang Qi¹, Yue Li^1,3, Haibin Jin¹, Jianying Feng¹, Dong Tian¹, Weisong Mu^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.1, pp. 197-232, 2023, DOI:10.32604/cmes.2023.026113

Abstract An appropriate optimal number of market segments (ONS) estimation is essential for an enterprise to achieve successful market segmentation, but at present, there is a serious lack of attention to this issue in market segmentation. In our study, an independent adaptive ONS estimation method BWCON-NSDK-means++ is proposed by integrating a new internal validity index (IVI) Between-Within-Connectivity (BWCON) and a new stable clustering algorithm Natural-SDK-means++ (NSDK-means++) in a novel way. First, to complete the evaluation dimensions of the existing IVIs, we designed a connectivity formula based on the neighbor relationship and proposed the BWCON by integrating the connectivity with other two… More >

R. Prasanna^1,*, Uma Govindarajan¹, N. S. Bhuvaneswari²

Computer Systems Science and Engineering, Vol.46, No.2, pp. 1961-1979, 2023, DOI:10.32604/csse.2023.032424

Abstract In this paper, an optimized Genetic Algorithm (GA) based internal model controller-proportional integral derivative (IMC-PID) controller has been designed for the control variable to output variable transfer function of dc-dc boost converter to mitigate the effect of non-minimum phase (NMP) behavior due to the presence of a right-half plane zero (RHPZ). This RHPZ limits the dynamic performance of the converter and leads to internal instability. The IMC PID is a streamlined counterpart of the standard feedback controller and easily achieves optimal set point and load change performance with a single filter tuning parameter λ. Also, this paper addresses the influences… More >

Xiaohui Cheng¹, Haiqing Si^1,*, Yao Li¹, Peihong Zhang²

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.2, pp. 1729-1742, 2023, DOI:10.32604/cmes.2023.022694

Abstract To understand the influence of the initial release conditions on the separation characteristics of the store and improve it under high Mach number (Ma = 4) flight conditions, the overset grid method and the Realizable turbulence model coupled with an equation with six degrees of freedom are used to simulate the store released from the internal bay. The motion trajectory and the attitude angle of the store separation under the conditions of different centroid, velocity, height and control measures are given by the calculated result. Through analysis, the position of the centroid will affect the separation of the store, which needs to… More >

WEICHEN ZHAO¹, PINGFAN ZHOU¹, BENZHEN LOU¹, YAQI JIANG¹, YUANBO LI¹, MINGSHU LI¹, NOMAN SHAKOOR¹, YUKUI RUI^1,2,3,4,*

BIOCELL, Vol.47, No.3, pp. 493-502, 2023, DOI:10.32604/biocell.2023.025740

Abstract As the climate worsens and the demand for food grows, so does the interest in nanoagriculture. The interaction between plants and nanomaterials (NMs) has been extensively and intensively examined. However, stopping at the outcome of a phenomenon is often insufficient. Therefore, we introduce three important processes of nanoparticle-plant interactions: translocation, transformation, and plant metabolism. During the migration of nanoparticles, size and surface electrical properties are the main determining factors. Additionally, the interaction of nanoparticles with cell membranes is another key aspect of research. The transformation of nanoparticles in plants is mainly due to redox substances. The way that nanoparticles affect… More >

Mei Wang¹, Xinzhu Fan¹, Quan Bu¹, Puyou Jia^2,3,*, Shouqi Yuan⁴

Journal of Renewable Materials, Vol.11, No.4, pp. 2015-2031, 2023, DOI:10.32604/jrm.2023.026063

Abstract The additives present in polyvinyl chloride (PVC) materials are the major source of organic by-products during PVC degradation. The thermal stabilizer and plasticizer are the main additives that endow PVC with the required properties during its processing. However, these two additives easily migrate when samples are obtained by physical mixing of the additives with PVC. This causes the reduction of PVC sample efficacy and the increase in the formation of organic by-products in the radiolysis process. In this work, two kinds of grafted PVC samples (tung-oil derivative grafted PVC and Atz grafted PVC, abbreviated as P-GT₄ and P-AZ₃) were synthesized… More > Graphic Abstract

Rachedi Khadraoui¹, Latra Boumaraf^1,*, Philippe Haberschill²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.5, pp. 1115-1128, 2023, DOI:10.32604/fdmp.2022.022674

Abstract A theoretical investigation is presented about a double evaporator ejector refrigeration cycle (DEERC). Special attention is paid to take into account the influence of the sub-cooling and superheating effects induced by an internal heat exchanger (IHX). The ejector is introduced into the baseline cycle in order to mitigate the throttling process losses and increase the compressor suction pressure. Moreover, the IHX has the structure of a concentric counter-flow type heat exchanger and is intentionally used to ensure that the fluid at the compressor inlet is vapor. To assess accurately the influence of the IHX on the DEERC performance, a mathematical… More > Graphic Abstract

Antonio Mariani, Davide Laiso, Biagio Morrone^*, Andrea Unich

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.3, pp. 593-601, 2023, DOI:10.32604/fdmp.2022.022524

Abstract Waste heat recovery is one of the possible solutions to improve the efficiency of internal combustion engines. Instead of wasting the exhaust stream of an energy conversion system into the environment, its residual energy content can be usefully recovered, for example in Organic Rankine Cycles (ORC). This technology has been largely consolidated in stationary power plants but not yet for mobile applications, such as road transport, due to the limitations in the layout and to the constraints on the size and weight of the ORC system. An ORC system installed on the exhaust line of a bus powered by a… More > Graphic Abstract

R. Anandha Murugan^1,*, B. Sathyabama²

Intelligent Automation & Soft Computing, Vol.36, No.1, pp. 353-368, 2023, DOI:10.32604/iasc.2023.032355

Abstract Improved picture quality is critical to the effectiveness of object recognition and tracking. The consistency of those photos is impacted by night-video systems because the contrast between high-profile items and different atmospheric conditions, such as mist, fog, dust etc. The pictures then shift in intensity, colour, polarity and consistency. A general challenge for computer vision analyses lies in the horrid appearance of night images in arbitrary illumination and ambient environments. In recent years, target recognition techniques focused on deep learning and machine learning have become standard algorithms for object detection with the exponential growth of computer performance capabilities. However, the… More >

R. Vidhya^1,*, P. Vanaja Ranjan², N. R. Shanker³

Intelligent Automation & Soft Computing, Vol.36, No.1, pp. 153-168, 2023, DOI:10.32604/iasc.2023.031942

Abstract Preventive maintenance in the transformer is performed through a differential relay protection system, and it protects the transformer from internal and external faults. However, the Current Transformer (CT) in the differential protection system mal-operates during inrush currents. CT saturates due to magnetizing inrush currents and causes false tripping of the differential relays. Moreover, identification of tripping in protection relay either due to inrush current or internal faults needs to be diagnosed. For the above problem, continuous monitoring of transformer breather and CT terminals with thermal camera helps detect the tripping in relay due to inrush or internal fault. The transformer’s… More >

Yunqi Hu^1,2,3,#, Yanhui Xiang^1,2,3,#,*

International Journal of Mental Health Promotion, Vol.24, No.6, pp. 945-957, 2022, DOI:10.32604/ijmhp.2022.019917

Abstract It has been shown that early experiences of maltreatment can stably influence an individual’s internal and external aggressive behavior in adulthood. And on what mechanisms do this stability arise? From the perspective of personality solidification theory, this study sample of 1951 primary and secondary school students was used to explore the relationship between child maltreatment, Big Five personality and internalized and externalized aggression, as well as the different mechanisms of differentiation of personality components in child maltreatment on two different natures of aggression, using four scales: The Childhood Trauma Questionnaire (CTQ), Revised NEO Personality Inventory (NEO-PI-R), None-suicidal Self-Injury Scale and… More >