Yodthong Baimark^*, Theeraphol Phromsopha

Journal of Renewable Materials, Vol.11, No.4, pp. 1881-1894, 2023, DOI:10.32604/jrm.2023.025400 - 01 December 2022

Abstract A poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide)(PLLA-PEG-PLLA) block copolymer has great potential for use as a flexible bioplastic. Highly flexible bioplastics are required for flexible packaging applications. In this work, a PEG was incorporated into block copolymer as a plasticizer by solvent casting. PLLA-PEG-PLLA/ PEG blends with different blend ratios were prepared, and the plasticizing effect and miscibility of PEG in block copolymer were intensively investigated compared to PLLA/PEG blends. The results indicated that the PEG was an effective plasticizer for the block copolymer. The blending of PEG decreased glass-transition temperature and accelerated the crystallization of both the PLLA More > Graphic Abstract

Chengtao Gao^1,2, Yang Wu³, Haibo Xie^1,*

Journal of Renewable Materials, Vol.11, No.3, pp. 1137-1152, 2023, DOI:10.32604/jrm.2022.021473 - 31 October 2022

Abstract

Due to the increasing demand for modified polylactide (PLA) meeting “double green” criteria, the research on sustainable plasticizers for PLA has attracted broad attentions. This study reported an open-ring polymerization method to fabricate cellulose (MCC)-g-PCL (poly (ε-caprolactone)) copolymers with a fully sustainable and biodegradable component. MCC-g-PCL copolymers were synthesized, characterized, and used as green plasticizers for the PLA toughening. The results indicated that the MCC-g-PCL derivatives play an important role in the compatibility, crystallization, and toughening of the PLA/MCC-g-PCL composites. The mechanical properties of the fully bio-based PLA/MCC-g-PCL composites were optimized by adding 15 wt% MCC-g-PCL,

… More > Graphic Abstract

A. MADHAN KUMAR¹, K. JAYAKUMAR^2,*, M. SHALINI³

Journal of Polymer Materials, Vol.39, No.3-4, pp. 269-281, 2022, DOI:10.32381/JPM.2022.39.3-4.7

Abstract Polylactic acid (PLA) is the most popular thermoplastic biopolymer providing a stiffness and strength alternative to fossil-based plastics. It is also the most promising biodegradable polymer on the market right now, thus gaining a substitute for conservative artificial polymers. Therefore, the current research focuses on synthesizing and mechanical characterization of particlereinforced PLA composites. The hot compression molding technique was used to fabricate PLA-based composites with 0, 2.5, 5, and 7.5 weight % of sawdust, rice husk, and bagasse particle reinforcements to enhance the performance of the PLA. The pellets of PLA matrix were taken with… More >

Chaodong Liu, Yutong Yang, Boyu Cui, Weihong Wang^*

Journal of Renewable Materials, Vol.10, No.11, pp. 2961-2972, 2022, DOI:10.32604/jrm.2022.019761 - 29 June 2022

Abstract Microfibrillated cellulose (MFC) is often added to polylactic acid (PLA) matrixes as a reinforcing filler to obtain fully-biodegradable composites with improved mechanical properties. However, the incompatibility between MFC and the PLA matrix limits the mechanical performance of MFC-reinforced PLA composites. In this paper, DL-lactic acid-grafted-MFC (MFC-g-DL) was used to improve the compatibility with PLA. Reinforced composites were prepared by melt extrusion and hot-cold pressing. The tensile strength of the PLA/MFC-g-DL composite increased by 22.1% compared with that of PLA after adding 1% MFC-g-DL. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and dynamic thermomechanical analysis (DMA) were… More > Graphic Abstract

Ping Zhang, Siyu Gan, Lin Chen^*, Hao Chen, Chunhui Jia, Yingke Fu, Ying Xiong^*

Journal of Renewable Materials, Vol.10, No.11, pp. 2937-2947, 2022, DOI:10.32604/jrm.2022.019590 - 29 June 2022

Abstract Nano filler synergistic intumescent flame retardant (IFR) system is an effective way to improve the flame retardant properties of polymer. In this study, the effects of montmorillonite (MMT) on the flame retardant properties of polylactic acid/layered double hydroxides (PLA/LDH) and PLA/IFR/LDH were investigated. The results show that both LDH and LDH/IFR can reduce the peak heat release rate (HRR) of PLA and prolong the combustion time of PLA; When a proportionate MMT is introduced into PLA/LDH and PLA/IFR/LDH systems, respectively, MMT will not only affect the degradation process of PLA composites during combustion, but also More >

Mahmood Hameed Majeed^*, Nabeel Kadhem Abd Alsaheb

Journal of Renewable Materials, Vol.10, No.9, pp. 2391-2408, 2022, DOI:10.32604/jrm.2022.019887 - 30 May 2022

Abstract Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease, injury, or congenital disabilities. Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs. These are utilized to attach the right cells and then grow them. Rapid prototyping appears to be the most promising technology due to its high level of precision and control. Bone tissue replacement “scaffolding” is a common theme discussed in this article. The fused deposition technique was used to construct our scaffold, and a polymer called polylactic acids… More > Graphic Abstract

Wenwen Guo^1,2,3, Wei Cai³, Dong Wang¹, Junling Wang⁴, Xiefei Zhu^5,*, Bin Fei^2,*

Journal of Renewable Materials, Vol.10, No.7, pp. 1875-1888, 2022, DOI:10.32604/jrm.2022.018823 - 07 March 2022

Abstract Fabrication of flame retardants from renewable biomass has aroused extensive interest over the past decade. This work reported a synthesis of isosorbide-derived polyphosphonate (PICPP) as an anti-flammable agent for poly (lactic acid) (PLA). The presence of PICPP notably declined the storage modulus of PLA/PICPP owing to the declined molecular weight of PLA catalyzed by the presence of PICPP. PLA and PLA/PICPP thermally degraded in one stage under either air or nitrogen atmosphere. With increasing the amount of PICPP, the onset thermal decomposition temperature of PLA/PICPP was decreased gradually, owing to the earlier decomposition of PICPP. More >

MARÍA G. FLORES-SÁNCHEZ^1,*, ROBERTO OLAYO², J. MORALES-CORONA², ATLÁNTIDA M. RAYA-RIVERA³, DIEGO R. ESQUILIANO-RENDÓN³

BIOCELL, Vol.46, No.3, pp. 829-836, 2022, DOI:10.32604/biocell.2022.016988 - 18 November 2021

Abstract This article presents the construction of scaffolds composed of polylactic acid (PLA) with different concentrations of hydroxyapatite (HA) by electrospinning, which were superficially modified with polypyrrole (PPy/I) by plasma polymerization. A preliminary study was conducted of the biological and mechanical behavior of the scaffolds when they were implanted in the back of rabbits for 30 days; bone cells differentiated from mesenchymal stem cells (MSCs) were used. The bone cell and scaffold structures were characterized by histological, immunohistochemical, and mechanical stress tests. Hematoxylin–eosin staining showed good tissue conformation. The immunohistochemical tests highlighted the presence of the More >

Liqiong Ding¹, Pingsheng Li², Liu He¹, Fengnan Xu¹, Jieqiong Ding^3,*, Binhua Luo^1,*

Journal of Renewable Materials, Vol.10, No.3, pp. 767-780, 2022, DOI:10.32604/jrm.2022.016903 - 28 September 2021

Abstract The development of contrast agents that can be activated by multiple modes is of great significance for tumor diagnosis. In this study, the lactoferrin (Lf)-conjugated polylactic acid (PLLA) nanobubbles (Lf-PLLA NBs) were used to encapsulate liquid perfluoropentane (PFP) with the double emulsion method, creating PFP loaded (PFP/Lf-PLLA) NBs for the ultrasound/magnetic resonance dual-modality imaging of subcutaneous tumor. The particle diameter and stability of nanobubbles were investigated by photon correlation spectroscopy. The biocompatibility of nanobubbles was preliminarily evaluated by cell proliferation and migration assay, hemolysis rate, and blood biochemistry analysis. A B-mode clinical ultrasound real-time imaging… More >

Vignesh Sekar^1,*, Se Yong Eh Noum¹, Azma Putra², Sivakumar Sivanesan¹, Kok Chun Chin¹, Yi San Wong¹, Dg Hafizah Kassim³

Sound & Vibration, Vol.55, No.4, pp. 343-352, 2021, DOI:10.32604/sv.2021.014916 - 18 October 2021

Abstract This paper presents the development and performance of micro-perforated panels (MPP) from natural fiber reinforced composites. The MPP is made of Polylactic Acid (PLA) reinforced with Oil Palm Empty Fruit Bunch Fiber (OPEFBF). The investigation was made by varying the fiber density, air gap, and perforation ratio to observe the effect on the Sound Absorption Coefficient (SAC) through the experiment in an impedance tube. It is found that the peak level of SAC is not affected, but the peak frequency shifts to lower frequency when the fiber density is increased. This phenomenon might be due More >