Lei Liu^*, Chuanhui Huang, Xinghua Lu, Ping Yu, Longhai Li, Huafeng Guo

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 501-509, 2021, DOI:10.32604/fdmp.2021.015161

Abstract In order to study the effect of Al₂O₃ nanoparticles in the cavitation-based strengthening process of magnesium alloys, the impact of a micro-jet generated by bubble collapse has been considered. The strengthening mechanism is based on the transfer of the energy of cavitation due to bubble collapse to Al₂O₃ particles, which then undergo collision with the surface of the sample. The hardness, surface morphology, element content and chemical state of the strengthened samples have been analyzed by microhardness tests, SEM (scanning electron microscopy) and XPS (X-ray photoelectron spectroscopy) techniques. The results show that: after 5 min of strengthening, nanoparticles can be… More >

Adnan¹, Umar Khan², Naveed Ahmed³, Syed Tauseef Mohyud-Din⁴, Dumitru Baleanu^5,6,7, Kottakkaran Sooppy Nisar⁸, Ilyas Khan^9,*

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 213-228, 2021, DOI:10.32604/cmc.2021.014383

Abstract Entropy Generation Optimization (EGO) attained huge interest of scientists and researchers due to its numerous applications comprised in mechanical engineering, air conditioners, heat engines, thermal machines, heat exchange, refrigerators, heat pumps and substance mixing etc. Therefore, the study of radiative hybrid nanofluid (GO-MoS₂/C₂H₆O₂–H₂O) and the conventional nanofluid (MoS₂/C₂H₆O₂–H₂O) is conducted in the presence of Lorentz forces. The flow configuration is modeled between the parallel rotating plates in which the lower plate is permeable. The models which govern the flow in rotating system are solved numerically over the domain of interest and furnished the results for the temperature, entropy generation and… More >

Yi Long^1,#,* , Chunling Zhang^2,#,*, Lan Chen^3,#, Tietao Di², Lu Chen², Lisha Tang², Kaizhong Luo², Yu Yan¹, Pingzhen Tong², Jie Xiang⁴

Journal of Renewable Materials, Vol.9, No.6, pp. 1075-1085, 2021, DOI:10.32604/jrm.2021.014555

Abstract In our previous study, silver nanoparticles were prepared using AgNO₃ and carboxymethyl chitosan (CMCS) which is commercially available with solar irradiation. In this study, the efficacy and safety of silver nanoparticles prepared by this method were evaluated for healing wounds in rats with diabetes. We also attempted to determine the underlying mechanism and influencing factors of the silver nanomaterial preparation method. Compared with growth factors, silver nanoparticles exhibit better healing effects for rats with diabetes. No remnant silver ions were detected in the major organs of these rats after the application of silver nanoparticles. Silver nanoparticles prepared using CMCS are… More >

Saqib Murtaza¹, Farhad Ali^2,3,*, Nadeem Ahmad Sheikh¹, Ilyas Khan⁴, Kottakkaran Sooppy Nisar⁵

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 2915-2932, 2021, DOI:10.32604/cmc.2021.013757

Abstract The present article aims to examine the heat and mass distribution in a free convection flow of electrically conducted, generalized Jeffrey nanofluid in a heated rotatory system. The flow analysis is considered in the presence of thermal radiation and the transverse magnetic field of strength B₀. The medium is porous accepting generalized Darcy’s law. The motion of the fluid is due to the cosine oscillations of the plate. Nanofluid has been formed by the uniform dispersing of the Silver nanoparticles in regular engine oil. The problem has been modeled in the form of classical partial differential equations and then generalized… More >

SALLY NEGM^1,2, MOHAMMAD EL-METWALLY³, WESAM ELDIN SABER⁴, SAHAR ABO-NEIMA⁵, MAHMOUD MOUSTAFA^6,7,*, ATTALLA EL-KOTT^6,8

BIOCELL, Vol.45, No.1, pp. 119-127, 2021, DOI:10.32604/biocell.2021.012011

Abstract The need for the bacterial proteinase is rapidly growing, urging to catch a lowcost medium for the microbial fermentation, nanoparticles can play a vital role in this respect. The proteinase of Talaromyces purpureogenus was produced on the tubers of Helianthus tuberosus that also operated as solid support for the fermentation process. The interface amongst nitrogen sources (NH₄Cl and yeast extract) was investigated, applying the statistical modeling of central composite design under solid-state fermentation. The optimum medium for proteinase secretion was stimulated by 979.82 mg NH₄Cl and 437.68 mg yeast extract per 100 g substrate, yielding 108.15 U/g tubers. Using Plackett-Burman… More >

Faizan Ahmed^*, Waqar Ahmed Khan, Jamal Nayfeh

CMC-Computers, Materials & Continua, Vol.66, No.3, pp. 2843-2856, 2021, DOI:10.32604/cmc.2021.012041

Abstract In the present study, an attempt is made to enhance the performance of heat pump by utilizing two types of nanofluids namely, copper and alumina nanofluids. These nanofluids were employed around the evaporator coil of the heat pump. The nanofluids were used to enhance the heat input to the system by means of providing an external jacket around the evaporator coil. Both the nanofluids were prepared in three volume fractions 1%, 2% and 5%. Water was chosen as the base fluid. The performance of the heat pump was assessed by calculating the coefficient of performance of the system when it… More >

Yang Li^#, Xiaoying Zha^#, Xingliang Xiong, Yan Zhang, Ying Feng, Haojiang Xie, Linqing Zhang, Qifeng Jiang^*

Journal of Renewable Materials, Vol.9, No.2, pp. 295-310, 2021, DOI:10.32604/jrm.2021.012271

Abstract A silk fibroin (SF) spongy wound dressing incorporated with silver nanoparticles (Ag-NPs) was developed for biomedical applications. Ag-NPs were efficiently synthesized in situ via ultra violet (UV) with AgNO₃ as precursor and silk fibroin as reducing and protecting agent, respectively. After lyophilization, the formed silk fibroin spongy wound dressing (SFWD) exhibited polyporous morphology and inner lamellae structures, with uniform dispersion of Ag-NPs. The porous structure provided SFWD with the ability to absorb tissue exudatealmost 6 times of its own weight, which could guarantee the sustained release of Ag-NPs. By methanol treatment, SFWD showed much improved mechanical properties and more stable… More >

Jiali Wei^*, Ying Zou, Ping Li, Xiaojun Yuan

Phyton-International Journal of Experimental Botany, Vol.89, No.4, pp. 883-891, 2020, DOI:10.32604/phyton.2020.010973

Abstract TiO₂ nanoparticles (nano-TiO₂) are widely used in the world, and a considerable amount of nano-TiO₂ is released into the environment, with toxic effects on organisms. In the various species of higher plants, growth, including seed germination, root elongation, and biomass accumulation, is affected by nano-TiO₂. However, the underlying molecular mechanisms remain to be elucidated. In this study, we observed that nano-TiO₂ promoted root elongation in a dose-dependent manner. Furthermore, we found that nano-TiO₂ elevated auxin accumulation in the root tips of the auxin marker lines DII-VENUS and DR5:: GUS, and, correspondingly, quantitative real-time PCR analysis revealed that nano-TiO₂ increased the… More >

Rogelio Solorzano-Toala¹, Daniel Gonzalez-Mendoza^2,*, Benjamin Valdez-Salas³, Vianey MendezTrujillo⁴, Federico Gutierrez-Miceli¹, Ernesto Beltran-Partida³, Olivia Tzintzun-Camacho²

Journal of Renewable Materials, Vol.8, No.9, pp. 1129-1137, 2020, DOI:10.32604/jrm.2020.09845

Abstract The aim of this study was the synthesis of silver nanoparticle using Annona diversifolia Safford. The silver nanoparticles obtained were analyzed by spectroscopic methods and dynamic light scattering methods. The inhibition of AgNPs was evaluated against Bacillus cereus, Klebsiella pneumoniae and Enterobacter aerogenes. The results showed that AgNPs have high values at 3 keV and particle size between 45 to 58 nm with a homogenous morphology. The AgNPs showed growth inhibition against Klebsiella pneumoniae and Enterobacter aerogenes. Therefore studies are needed to confirm the potential antimicrobial of different AgNP from A. diversifolia in Gram negative and Gram positive bacteria. More >

Anees Imtiaz¹, Oi-Mean Foong², Aamina Aamina¹, Nabeel Khan¹, Farhad Ali^{3, 4, *}, Ilyas Khan⁵

CMC-Computers, Materials & Continua, Vol.65, No.1, pp. 171-192, 2020, DOI:10.32604/cmc.2020.011397

Abstract Gold metallic nanoparticles are generally used within a lab as a tracer, to uncover on the presence of specific proteins or DNA in a sample, as well as for the recognition of various antibiotics. They are bio companionable and have properties to carry thermal energy to tumor cells by utilizing different clinical approaches. As the cancer cells are very smaller so for the infiltration, the properly sized nanoparticles have been injected in the blood. For this reason, gold nanoparticles are very effective. Keeping in mind the above applications, in the present work a generalized model of blood flow containing gold… More >