Nina Graupner^1,*, Thiprada Poonsawat², Koranat Narkpiban^3,4, Jörg Müssig¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2279-2300, 2023, DOI:10.32604/jrm.2023.025529

Abstract Thailand has a huge variability of bast fiber plants, some of which have been little researched regarding their applicability in composites. Bast fiber(bundle)s from different species were investigated and incorporated into a polylactide (PLA) matrix by injection molding. Hemp and kenaf were used as well-studied fibers, while roselle, Fryxell and paper mulberry are less extensively characterized. Tensile strength, tensile modulus and interfacial shear strength (IFSS) of single fiber(bundle)s were highest for hemp, followed by kenaf, roselle, Fryxell and paper mulberry. Despite the lower tensile strength and IFSS of paper mulberry, the highest tensile strength was achieved for the paper mulberry/PLA… More > Graphic Abstract

Zhenguo Wang, Lenan Wang, Yejing Meng^*, Yong Wen, Jianzhong Pei

Journal of Renewable Materials, Vol.11, No.5, pp. 2469-2489, 2023, DOI:10.32604/jrm.2023.025497

Abstract In the field of roads, due to the effect of vehicle loads, piezoelectric materials under the road surface can convert mechanical vibration into electrical energy, which can be further used in road facilities such as traffic signals and street lamps. The barium titanate/polyvinylidene fluoride (BaTiO₃/PVDF) composite, the most common hybrid ceramic-polymer system, was widely used in various fields because the composite combines the good dielectric property of ceramic materials with the good flexibility of PVDF material. Previous studies have found that conductive particles can further improve the dielectric and piezoelectric properties of other composites. However, few studies have investigated the… More >

Wei Xiong^1,2, Dagang Li^1,*, Peixing Wei², Lin Wang², Qian Feng¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2265-2278, 2023, DOI:10.32604/jrm.2023.025483

Abstract Poplar wood, which was used as the absorption material for the solar-driven interfacial evaporation, was treated for 3 days, 6 days and 9 days with the pectinase, and then was simulated for photothermal evaporation test at one standard solar radiation intensity (1 kW⋅m⁻²). The effects of pectinase treatment on cell passage and water migration capacity of poplars were analyzed by the mercury intrusion porosimetry, the scanning electron microscope and fractal theory. It was found that the pit membrane and the ray parenchyma cells of poplar wood were degraded and destroyed after pectinase treatment. Compared with the untreated poplar wood, the evaporation… More >

Abdellah Asbayou^*, Ahmed Ihlal, Ismail Isknan, Ahmed Soussi, Lahoussine Bouhouch

Journal of Renewable Materials, Vol.11, No.5, pp. 2249-2264, 2023, DOI:10.32604/jrm.2023.025456

Abstract Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco. The optical transmittance of the front glass was found to depend on the nature and density of dust. The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy. It was found that the granulometry of dust particles depends on the study area. For a dust density of around 20 g/m², the maximum power Pmax of the solar panel decreases drastically from 30 to 20 W for the (HP)… More > Graphic Abstract

Yunfeng Li^1,#, Cheng Zhao^2,#, Qianqian Lu^2,*

Journal of Renewable Materials, Vol.11, No.5, pp. 2417-2431, 2023, DOI:10.32604/jrm.2023.025443

Abstract The control of carbon emissions and energy conservation, and environmental protection are hot spots of global concern. In this paper, phase change paraffin wax is applied to porous materials for adsorption and storage, and nature’s eco-friendly materials are selected as the porous matrix to propose an eco-friendly phase change concrete using eco-friendly materials as raw materials. It was obtained that the strength of the phase change concrete utilizing environmentally friendly materials was 25.4% to 36.8% lower than that of ordinary concrete, while some of the phase change light aggregates were found to produce slip damage with the cement paste in… More >

Wei Zhang¹, Mulian Zheng^1,*, Yifeng Li², Wuxi Zheng³

Journal of Renewable Materials, Vol.11, No.5, pp. 2513-2529, 2023, DOI:10.32604/jrm.2023.025275

Abstract Steel slag is characterized by high strength, good wear resistance and micro-expansion. This study aims at exploring the potential of steel slag in cement stabilized aggregates, mainly including mechanical properties, shrinkage and compensation mechanisms. For this purpose, the compressive strength and compressive resilient modulus of cement stabilized aggregates with different steel slag contents (CSMS) were initially investigated. Subsequently, the effects of steel slag and cement on dry shrinkage, temperature shrinkage, and total shrinkage were analyzed through a series of shrinkage test designs. Additionally, in combination with X-ray diffraction (XRD) and Scanning electron microscope (SEM), the characteristic peaks and microscopic images… More >

Junzhen Di, Xueying Sun^*, Siyi Zhang, Yanrong Dong, Bofu Yuan

Journal of Renewable Materials, Vol.11, No.5, pp. 2209-2232, 2023, DOI:10.32604/jrm.2023.025241

Abstract To address the serious pollution of heavy metals in AMD, the difficulty and the high cost of treatment, Fe₃O₄-L was prepared by the chemical co-precipitation method. Based on the single-factor and RSM, the effects of particle size, total Fe concentration, the molar ratio of Fe²⁺ to Fe³⁺ and water bath temperature on the removal of AMD by Fe₃O₄-L prepared by chemical co-precipitation method were analyzed. Static adsorption experiments were conducted on Cu²⁺, Zn²⁺ and Pb²⁺ using Fe₃O₄-L prepared under optimal conditions as adsorbents. The adsorption properties and mechanisms were analyzed by combining SEM-EDS, XRD and FTIR for characterization. The study… More > Graphic Abstract

Yiwen Zhang¹, Jianjun Xie^1,*, Minghui Sun¹, Shaolong Wang¹, Tengfei Xu^2,3, Yonggen Xu^2,3, Xiaoqing Ding^2,3, Ying Shi¹, Lei Zhang¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2125-2141, 2023, DOI:10.32604/jrm.2023.025127

Abstract Foam glass is a kind of green building material that is widely used because of its excellent thermal insulation and mechanical properties. In this study, the borosilicate foam glass was fabricated by powder sintering method using recycled soda lime waste glass, quartz, and borax as the primary raw materials. CaCO₃ was used as a foaming agent and Na₂CO₃ as a flux agent. Results showed that as the quartz content decreases from 30 to 17.5 wt.% and borax content increases from 5 to 17.5 wt.%, the pore size, porosity, and thermal insulation of borosilicate foam glass increase significantly, while the compressive strength decreases… More > Graphic Abstract

Xing Zhou^1,2,5,6,*, Qi Wang¹, Sai Feng¹, Jingrui Deng¹, Keming Zhu¹, Yun Xing^1,3, Xiaolian Meng³, Xiaojun Wang⁴, Lu Li^5,6

Journal of Renewable Materials, Vol.11, No.5, pp. 2085-2108, 2023, DOI:10.32604/jrm.2023.025032

Abstract Greenhouse gas emissions from waste plastics have caused global warming all over the world, which has been a central threat to the ecological environment for humans, flora and fauna. Among waste plastics, waste polyethylene terephthalate (PET) is attractive due to its excellent stability and degradation-resistant. Therefore, merging China’s carbon peak and carbon neutrality goals would be beneficial. In this review, we summarize the current state-of-the-art of carbon emission decrease from a multi-scale perspective technologically. We suggest that the carbon peak for waste PET can be achieved by employing the closed-loop supply chain, including recycling, biomass utilization, carbon capture and utilization.… More > Graphic Abstract

Xingyu Liang¹, Xiaoyu Gu¹, Myint Myint Paing Hsu², Yuhang He¹, Rongzhuo Zhang¹, Conghui Cai³, Zheng Wang^1,*

Journal of Renewable Materials, Vol.11, No.5, pp. 2333-2344, 2023, DOI:10.32604/jrm.2023.026137

Abstract In order to improve the fire resistance, water resistance and wear resistance of ordinary plywood products in the wood processing industry, three composite structures of plywood products S1, S2 and S3 were designed in this paper, and a reasonable production process was proposed. Through the physical and mechanical properties and fire resistance testing and technical and economic analysis, the applicability of composite plywood was evaluated. The results of the study showed that the physical mechanics of the three kinds of composite structure plywood met the standard requirements, and their fire resistance was far better than that of ordinary plywood. Among… More >