Guangyan Fan, Fuyong Su^*, Cunwang Li, Bin Li

Frontiers in Heat and Mass Transfer, Vol.21, pp. 281-292, 2023, DOI:10.32604/fhmt.2023.043221 - 30 November 2023

Abstract To investigate the flow and heat transfer process of blast furnace slag through the slag trench after the slag is discharged, a three-dimensional physical model is established and simulated according to the actual size of the slag trench and the physical properties of the high-temperature slag. The temperature fied and flow field distribution of the high-temperature slag liquid inside the slag trench is obtained by numerical simulation under different working conditions, and the effects of operating conditions such as slag trench inclination, high-temperature slag inlet flow rate, and inlet temperature are investigated. The results show… More >

Amal A. Harbood^*, Hameed K. Hamzah, Hatem H. Obeid

Frontiers in Heat and Mass Transfer, Vol.21, pp. 293-315, 2023, DOI:10.32604/fhmt.2023.01518 - 30 November 2023

Abstract The current work seeks to examine numerical heat transfer by using a complicated channel with a trapezoid shape hanging in the channel. This channel demonstrates two-dimensional laminar flow, forced convective flow, and incompressible flow. To explore the behavior of heat transfer in complex channels, several parameters, such as the constant Prandtl number (Pr = 6.9), volume fraction (ϕ) equal to (0.02 to 0.04), Cauchy number (Ca) equal to (10⁻⁴ to 10⁻⁸), and Reynolds number equal to (60 to 160) were utilized. At the complex channel, different elastic walls are used in different locations, with case A… More >

Amnart Boonloi¹, Withada Jedsadaratanachai^2,*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 317-336, 2023, DOI:10.32604/fhmt.2023.044929 - 30 November 2023

Abstract Thermal performance enhancement in a square channel heat exchanger (HX) using a passive technique is presented. Vortex turbulator insertion in a square channel HX as a passive technique is selected for thermal improvement. The vortex turbulator of interest is discrete X-V baffles (XVB). The discrete XVBs are inserted in the square channel with the main aim of generating vortex flow. The vortex flow generated can support the enhanced convective heat transfer coefficient and also enhance HX performance. Effects of baffle configuration (type A and B), baffle size (w/H = 0.05, 0.10, 0.15 and 0.20), baffle… More > Graphic Abstract

Swetha Lanka¹, Venkata Subrahmanyam Sajja^1,*, Dhaneshwar Prasad²

Frontiers in Heat and Mass Transfer, Vol.21, pp. 385-405, 2023, DOI:10.32604/fhmt.2023.042544 - 30 November 2023

Abstract An attempt is made to analyse some lubrication characteristics of rigid cylindrical asymmetric rollers under adiabatic and isothermal boundaries with rolling and sliding motion lubricated by a non-Newtonian incompressible Bingham plastic fluid under the behaviour of line contact. Here the lower surface is considered to move quicker than that of the upper surface; and the Roelands viscosity model is considered and assumed to depend upon the fluid pressure and the mean film temperature. The governing equations for fluid flow such as equations of motion with continuity and the momentum energy equation are solved using Runge-Kutta More >

Husam Rashid Hudear^*, Saad Najeeb Shehab

Frontiers in Heat and Mass Transfer, Vol.21, pp. 367-383, 2023, DOI:10.32604/fhmt.2023.042639 - 30 November 2023

Abstract This paper presents a numerical emulation study of heat transmission through tube banks in three-dimensions. Staggered configuration is displayed by fluid dynamics using computer programs (CFD) software (ANSYS fluent). The computer model is used to predict the values of the Nusselt number when changing the values of heat flux and longitudinal pitch. The longitudinal pitch (SL/D) of 1.3, 1.8, and 2.4 mm. The transverse pitch (ST/D) of 1.5 mm, and also considered Reynolds numbers 10000, 13000, 17000, and 190000. The staggered configuration of the tube bundle is demonstrated to investigate the impact of this arrangement More >

Mohammad Yaghoub Abdollahzadeh Jamalabadi, Jinxiang Xi^*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 65-79, 2023, DOI:10.32604/fhmt.2023.042613 - 30 November 2023

Abstract As a means of harvesting solar energy for water treatment, solar-driven vapor generation is becoming more appealing. Due to their entangled fibrous networks and high surface area, fibers can be used as building blocks to generate water vapor. In this paper, using a two-dimensional fiber bundle model, we studied the generation of solar vapor based on the fiber height, distance between fibers, and input sun radiation. The performance of solar absorption system was also evaluated by evaluating thermal and water management. Results showed a constant increase in solar vapor generation with an increasing fiber height… More > Graphic Abstract

Meng Jia, Mingjun Pang^*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 337-366, 2023, DOI:10.32604/fhmt.2023.044286 - 30 November 2023

Abstract The interphase mass, heat transfer efficiency, and flow resistance are strongly dependent on bubble size in gasliquid two-phase systems, so it is very important for engineering applications to effectively control bubble size. In this paper, the formation, growth, and detachment of single bubbles in Newtonian liquids based on capillary needles were studied in detail using a volume of fluid method. The authors investigated the effects of gas injection velocity, gravitational level, surface tension coefficient, needle radius, and liquid−phase properties (liquid viscosity and density) on the process of bubble generation, and the effects of the above… More >

Rodrigo Vidonscky Pinto¹, Flávio Augusto Sanzovo Fiorelli^2,*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 427-443, 2023, DOI:10.32604/fhmt.2023.041917 - 30 November 2023

Abstract The present work provides an experimental and numerical procedure to obtain the geometrical position of the hotspots of a microprocessor using the thermal images obtained from the transient thermal response of this processor subject to pulsating stress tests. This is performed by the solution of the steady inverse heat transfer problem using these thermal images, resulting in qualitative heat source distributions; these are analyzed using the mean heat source gradients to identify the elements that can be considered hotspots. This procedure identified that the processor INTEL Core 2 Quad Q8400S contains one hotspot located in More >

Jian Ai¹, Jie Xue^1,*, Jiabang Yu^1,2, Xinyu Huang², Pan Wei^1,2, Xiaohu Yang², Bengt Sundén^3,*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 47-63, 2023, DOI:10.32604/fhmt.2023.045134 - 30 November 2023

Abstract The calculation of heat and humidity load serves as the cornerstone of Heating, Ventilation, and Air Conditioning (HVAC) design. Nevertheless, as the heat and humidity load characteristics of underground structures differ substantially from those of above-ground structures, it is a challenge to derive their accurate calculation procedure through engineering experience. Therefore, it is particularly important to carry out quantitative research on heat and humidity load. This study used Design Builder software to study the influence of the design state point of air conditioning in underground buildings on energy consumption. The study showed that compared with More >

Mainak Bhaumik¹, Anirban Sur^2,*, Kavita Dhanawade³

Frontiers in Heat and Mass Transfer, Vol.21, pp. 467-486, 2023, DOI:10.32604/fhmt.2023.044605 - 30 November 2023

Abstract Pin fins are widely used in applications where effective heat transfer is crucial. Their compact design, high surface area, and efficient heat transfer characteristics make them a practical choice for many thermal management applications. But for a high heat transfer rate and lightweight application, aerofoil shape pin fins are a good option. This work focuses on an experimental model analysis of pin-fins with aerofoil shapes. The results were evaluated between perforation, no perforation, inline, and staggered fin configurations. Aluminum is used to make the pin fins array. The experiment is carried out inside a wind… More >