Liang Yi^1,*, Wen Gang¹, Nenggui Pan², Wangui Wang¹, Shengshuai Mo¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2777-2790, 2023, DOI:10.32604/fdmp.2023.021907

Abstract The development of thermal stress in the exhaust manifold of a gasoline engine is considered. The problem is addresses in the frame of a combined approach where fluid and structure are coupled using the GT-POWER and STAR-CCM+ software. First, the external characteristic curve of the engine is compared with a one-dimensional simulation model, then the parameters of the model are modified until the curve matches the available experimental values. GT-POWER is then used to transfer the inlet boundary data under transient conditions to STAR-CCM+ in real-time. The temperature profiles of the inner and outer walls of the exhaust manifold are… More >

Long Wang¹, Qingyun Shen¹, Gui Wang^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2877-2890, 2023, DOI:10.32604/fdmp.2023.029206

Abstract Drill cuttings are broken bits of solid material removed from a borehole drilled by rotary, percussion, or auger methods and brought to the surface in the drilling mud. When these cuttings enter the annulus, they have an effect on the drilling fluid rheology and density, which is, in general, quite difficult to evaluate. By introducing an empirical correlation for the rheological properties of cuttings-laden drilling fluids, this study proposes a pressure-loss prediction method for an extended-reach well (ERW). After verifying the accuracy of this method, a case study is considered and a sensitivity analysis is conducted assuming a yield-power law… More >

Noora S. Ekab¹, Ahmed Q. Salam², Ali O. Abd³, Miqdam T. Chaichan^4,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2847-2861, 2023, DOI:10.32604/fdmp.2023.028874

Abstract To improve the performances of diesel engines and to reduce the pollutants they emit, aluminum oxide nanoparticles in varying quantities (50, 100, 150 ppm) have been added to conventional diesel fuel. The results of such experimental tests have revealed that the addition of nano-Al₂O₃ particles to the diesel fuel reduces its consumption by 0.488%, 1.02%, and 1.377%, respectively and increases the brake thermal efficiency by 1.4%, 2.6%, and 3.8%, respectively. The concentrations of undesired gases decrease accordingly by 1.5%, 1.7%, and 2.8% for HC and by 5.88%, 11.7%, and 17.6%, respectively, for CO. For the same percentages of nanoparticles, NOx… More >

Yudong Tian^1,2, Gonghui Liu¹, Yue Qi^1,2,*, Jun Li^1,3, Yan Xi^1,4, Wei Lian^1,3, Xiaojie Bai², Penglin Liu¹, Xiaoguang Geng²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2837-2845, 2023, DOI:10.32604/fdmp.2023.028805

Abstract Organic rich dark shale of Q Formation can be found in many areas (e.g., in the North of S Basin). The shale target stratum is easy to hydrate and often undergoes spallation. Therefore, centering the casing in the horizontal section of the irregular borehole is relatively difficult. Similarly, achieving a good cement flushing efficiency under complex borehole conditions is a complex task. Through technologies such as centralizer, efficient preflushing, multi-stage flushing and ductile cement slurry, better performances can be achieved. In this study, it is shown that the cementing rate in the DY2H horizontal section is 97.8%, which is more… More >

Tianshu Wang¹, Guoqing Sun¹, Shaojun Zhang¹, Mingyu Wang¹, Jixin Wang², Yunwu Han^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2923-2932, 2023, DOI:10.32604/fdmp.2023.028740

Abstract In typical metal foundry applications, sand casting is still the most used technology. The related binder plays a very important role as its performances can directly influence the quality of castings. Among many binders, glues of animal origin have attracted much attention in recent years due to their reduced environmental impact. However, they display some drawbacks such as the tendency to coagulate easily at room temperature and a relatively low strength. In this study, a novel gas-hardening casting binder was prepared using an animal glue and anhydrous potassium carbonate as a hydrolyzing agent to avoid undesired agglomeration. Moreover, sodium pyrophosphate… More >

Yaofei Zhang¹, Guoxiang Li¹, Shuzhan Bai¹, Ke Sun^1,*, Guihua Wang^1,*, Yujie Jia², Zhengxian Fang²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2933-2951, 2023, DOI:10.32604/fdmp.2023.028804

Abstract Multiphase simulations based on the VOF (Volume of Fluid) approach, used in synergy with the cavitation Schnerr-Sauer method and the K-Epsilon turbulence model, have been conducted to study the behavior of an injector nozzle as a function of relevant structural parameters (such as the spray hole diameter and length). The related performances have been optimized in the framework of orthogonal experimental design and range analysis methods. As made evident by the results, as the spray hole diameter increases from 0.10 to 0.20 mm, the outlet mass flow rate grows by 243.23%. A small diameter of the spray hole, however, has… More >

Yuantao Liu¹, Yanzhe Li^1,*, Shanpeng Zhao^1,2, Youpeng Zhang¹, Taizhen Zhang³

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2533-2547, 2023, DOI:10.32604/fdmp.2023.027471

Abstract Turbulence is expected to play a relevant role in the so-called conductor gallop phenomena, namely, the highamplitude, low-frequency oscillation of overhead power lines due to the formation of ice structures and the ensuing effect that wind can have on these. In this work, the galloping time history of a wire with distorted (fixed in time) shape due to the formation of ice is analyzed numerically in the frame of a fluid-solid coupling method for different wind speeds and levels of turbulence. The results show that the turbulence intensity has a moderate effect on the increase of the conductor’s aerodynamic lift… More > Graphic Abstract

Bin Li^*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2729-2748, 2023, DOI:10.32604/fdmp.2023.029649

Abstract In order to overcome the deficiencies of current methods for the prediction of the productivity of shale gas horizontal wells after fracturing, a new sophisticated approach is proposed in this study. This new model stems from the combination several techniques, namely, artificial neural network (ANN), particle swarm optimization (PSO), Imperialist Competitive Algorithms (ICA), and Ant Clony Optimization (ACO). These are properly implemented by using the geological and engineering parameters collected from 317 wells. The results show that the optimum PSO-ANN model has a high accuracy, obtaining a R² of 0.847 on the testing. The partial dependence plots (PDP) indicate that… More >

Mohammed Bourega^*, Ibrahim Kromba, Khadidja Fellah Arbi, Sofiane Soulimane

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2471-2480, 2023, DOI:10.32604/fdmp.2023.028661

Abstract This study uses a T-junction to examine the effects of different parameters (velocity ratio, viscosity, contact angle, and channel size ratio) on the generation of microdroplets, related rate, and size. More specifically, numerical simulations are exploited to investigate situations with a velocity varying from 0.004 to 1.6 m/s for the continuous phase and from 0.004 to 0.8 m/s for the dispersed phase, viscosity ratios (0.668, 1, 6.689, 10, 66.899), contact angle 80° < θ < 270° and four different canal size ratios (1, 1.5, 2 and 4). The results show that canal size influences droplet size and the generation rate.… More > Graphic Abstract

Dongxiao Zhang¹, Lin Lu^1,*, Xiaobin Qi^2,3, Xuepu Yan¹, Cisong Gao¹, Yanxiao Hu¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2707-2728, 2023, DOI:10.32604/fdmp.2023.028641

Abstract A two-dimensional model, employing a dynamic mesh technology, is used to simulate numerically the transient multiphase flow field produced by two submerged parallel guns. After a grid refinement study ensuring grid independence, five different conditions are considered to assess the evolution of cavitation occurring in proximity to the gun muzzle. The simulation results show that flow interference is enabled when the distance between the parallel barrels is relatively small; accordingly, the generation and evolution of the vapor cavity becomes more complex. By means of the Q criterion for vorticity detection, it is shown that cavitation causes the generation of vorticity… More >