Submit

Login Login

Register Register

Home / Journals / ENERGY / Online First / doi:10.32604/ee.2025.074956
Journal Menu
Special Issues
Table of Content

All issues

Online First

2026

2025

2024

2023

2022

2021

2020

Past Issues

Open Access

ARTICLE

A New Well-Testing Method for Pumping-Shutdown Data of Multi-Fractured Horizontal Wells: A Case Study from the Sichuan Shale Gas Basin

Xuefeng Yang1,2, Chunyu Ren1,2, Deliang Zhang1,2, Huaicai Fan1,2, Yue Chen1,2, Yue Yang1,2, Yan Zhang1,2, Shuai Wu1,2, Baoyun Zhang3,*, Xin Zhao3
1 Shale Gas Research Institute, Southwest Oil & Gas Field Company, PetroChina, Chengdu, China
2 Shale Gas Evaluation and Exploitation Key Laboratory of Sichuan Province, Chengdu, China
3 Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum (Beijing), Beijing, China
* Corresponding Author: Baoyun Zhang. Email: email
(This article belongs to the Special Issue: Progress and Prospects of Hydraulic Fracture Network Morphology Characterization, Flow Simulation and Optimization Technology for Unconventional Oil and Gas Reservoirs)

Energy Engineering https://doi.org/10.32604/ee.2025.074956

Received 22 October 2025; Accepted 09 December 2025; Published online 30 January 2026

Abstract

In southern Sichuan’s deep shale gas development, multi-stage fractured horizontal wells are commonly used. Evaluating fracturing results is challenging due to complex fracture networks. This study classifies fracture systems into four types: single-wing, bi-wing, branched, and serial fractures. A discrete fracture model (DFM) combined with matrix-fracture flow is used to establish a single-stage well testing interpretation model. To address multi-solution issues in well testing, an equivalent fracture network model based on a trilinear flow model is proposed, adjusting crossflow coefficients and the fracture network volume ratio. The study finds significant differences in the pressure derivative dip and the second linear flow stage onset with changes in these parameters. Sensitivity analysis shows that inner zone permeability affects the early and middle stages of the well testing curve. Using shut-in pressure data, a numerical well testing model is applied, with results showing a fracture zone permeability of 0.95 mD, a fracture half-length of 87 m, and fracture network volume ratio of 5%. This research provides guidance for evaluating fracturing effects.

Keywords

Deep shale gas; single-stage fracture; well test analysis; fracture network morphology; discrete fracture model

  • 54

    View

  • 7

    Download

  • 0

    Like

Related articles
Copyright© 2026 Tech Science Press
© 1997-2026 TSP (Henderson, USA) unless otherwise stated

Share Link