Submit

Login Login

Register Register

Home / Journals / CMC / Online First / doi:10.32604/cmc.2026.074939
Journal Menu
Special Issues
Table of Content

All issues

Online First

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Open Access

ARTICLE

Prediction of Wall Thickness Parameters in TPMS Models Based on CNN-SVM and MLR

Qian Zhang1, Lei Fu1,2, Renzhou Chen3, Xu Zhan4,*
1 School of Mechanical Engineering, Sichuan University of Science and Engineering, Zigong, China
2 Intelligent Perception and Control Key Laboratory of Sichuan Province, Yibin, China
3 Chengdu Zhengheng Auto Parts Co., Ltd., Chengdu, China
4 School of Automation and Information Engineering, Sichuan University of Science and Engineering, Zigong, China
* Corresponding Author: Xu Zhan. Email: email
(This article belongs to the Special Issue: Additive Manufacturing: Advances in Computational Modeling and Simulation)

Computers, Materials & Continua https://doi.org/10.32604/cmc.2026.074939

Received 22 October 2025; Accepted 23 January 2026; Published online 28 February 2026

Abstract

Triply periodic minimal surface (TPMS) structures are widely utilized in engineering and biomedical fields owing to their superior mechanical and functional properties. However, limited by the current additive manufacturing (AM) techniques, insufficient wall thickness often leads to poor forming quality or even printing failure. Therefore, accurate prediction of wall thickness parameters during the design stage is essential. This study proposes a prediction approach for the wall thickness parameters of TPMS models by integrating a Convolutional Neural Network–Support Vector Regression (CNN-SVM) framework with Multiple Linear Regression (MLR). A total of 152 TPMS models were randomly generated, resulting in 912 sets of sample data. Voxel-based sampling and rasterization preprocessing were employed to prepare the data for model input. The CNN-SVM model was developed using TPMS type, lattice filling type, volume fraction, and cell length as input features, with wall thickness as the output variable. Subsequently, the MLR method was applied to quantify the influence weights of these parameters. Experimental results demonstrate that the CNN-SVM model achieves a mean squared error (MSE) of 0.0011 and a coefficient of determination (R2) of 0.92. Approximately 86.9% of the test samples exhibited prediction errors within 20%, representing performance improvements of 15.8%, 10.6%, and 18.5% over traditional MLR, CNN, and SVM models, respectively. The MLR analysis further indicates that the Sheet filling type exerts the most significant positive effect on wall thickness (0.45729), whereas the Diamond TPMS structure shows the most prominent negative impact (−0.23494). The proposed hybrid model provides an effective and reliable strategy for predicting wall thickness parameters in TPMS-based additive manufacturing designs.

Keywords

Tri-periodic minimal surfaces; additive manufacturing; point cloud preprocessing framework; convolutional neural network; support vector machine

  • 3

    View

  • 0

    Download

  • 0

    Like

Related articles
Copyright© 2026 Tech Science Press
© 1997-2026 TSP (Henderson, USA) unless otherwise stated

Share Link