Open Access

ARTICLE

Vitalii Chornii^1,2,*, Serhii G. Nedilko¹, Maxim Lazarenko¹, Oleksandr Alekseev¹, Mariia Sosnovs’ka¹, Valerii Barbash³, Olga Yashchenko³, Syed Shabhi Haider⁴, Yaroslav Zhydachevskyy⁴, Andrzej Suchocki⁴
Journal of Renewable Materials, Vol.13, No.4, pp. 653-668, 2025, DOI:10.32604/jrm.2025.058211 - 21 April 2025
Abstract The work deals with cellulose paper filled with nanocellulose and SrAl₂O₄:Eu,Dy oxide phosphor. It was found that both nanocellulose and oxide improve the tensile strength of the composites obtained. The samples with the oxide demonstrate a long-lasting photoluminescence (PL) under sunlight and ultra-violet (UV) illumination. Room-temperature the PL spectra reveal a wide multicomponent band spreading over all the visible spectral regions. The short-wavelength part of the band is ascribed to the cellulose-related luminescence, while the long-wavelength PL component with maxima near 540 nm corresponds to the luminescence of the SrAl₂O₄:Eu,Dy phosphor. The dependency of the PL… More >

Graphic Abstract

View

644

Download

231

Open Access

ARTICLE

Jiahao Liu^1,#, Xinyu Zhang^1,#, Huiwei Wang¹, Yupeng Li¹, Shan Jin¹, Guanxian Qiu¹, Ce Sun^1,2,*, Haiyan Tan¹, Yanhua Zhang^1,2,*
Journal of Renewable Materials, Vol.13, No.4, pp. 669-685, 2025, DOI:10.32604/jrm.2025.02025-0042 - 21 April 2025
Abstract In recent years, degradable materials to replace petroleum-based materials in preparing high-performance foams have received much research attention. Degradable polymer foaming mostly uses supercritical fluids, especially carbon dioxide (Sc-CO₂). The main reason is that the foams obtained by Sc-CO₂ foaming have excellent performance, and the foaming agent is green and pollution-free. In current research, Poly (butylene adipate-co-terephthalate) (PBAT), poly (lactic acid) (PLA), and other degradable polymers are generally used as the main foaming materials, but the foaming performance of these degradable polyesters is poor and requires modification. In this work, 10% PLA was added to PBAT to… More >

Graphic Abstract

View

427

Download

168

Open Access

ARTICLE

João Vitor Dorini Falavinha¹, Pedro Henrique Gonzales De Cademartori², Philippe Gérardin¹, Antonio Pizzi¹, Christine Gérardin-Charbonnier^1,*
Journal of Renewable Materials, Vol.13, No.4, pp. 687-697, 2025, DOI:10.32604/jrm.2025.058902 - 21 April 2025
Abstract Tannins are polyphenols widely present in the plant kingdom, commonly divided into two groups: condensed and hydrolysable tannins. Sustainable furanic bio-foams based on condensed tannins have been largely studied, but little is described about the use of hydrolysable tannins for this material. This study examined the potential of hydrolysable chestnut tannin in comparison to condensed mimosa tannins to produce furanic foams by chemical expansion. Due to the low reactivity of the hydrolysable tannin, the use of an external source for its polymerization and curing was necessary. Through Fourier transform infrared spectroscopy (FTIR) chromatography, it was More >

Graphic Abstract

View

546

Download

183

Open Access

REVIEW

Yuxin He^1,#, Yixin Li^2,#, Qiaoguang Li¹, Wenqing Xiao^1,*, Guijun Xie^2,*
Journal of Renewable Materials, Vol.13, No.4, pp. 699-718, 2025, DOI:10.32604/jrm.2025.058349 - 21 April 2025
（This article belongs to the Special Issue: Modification and Functionalization of Wood)
Abstract Wood, recognized as a renewable and environmentally sustainable material, plays a crucial role as an alternative energy resource within the construction industry. However, it is highly susceptible to mold and decay fungi, which can lead to surface discoloration and potentially compromise the structural integrity of wood. The advancement of nanotechnology has introduced innovative strategies for wood protection, enhancing its performance while imparting additional properties. Various approaches including nanosized metals, polymer nanocomposite and coating treatments are actively being explored in this field. Furthermore, integrating bio-based materials with nanotechnology offers a green and sustainable method for wood More >

View

523

Download

189

Open Access

ARTICLE

Prans Brazdausks^*, Maris Puke, Guntis Sosins
Journal of Renewable Materials, Vol.13, No.4, pp. 719-730, 2025, DOI:10.32604/jrm.2025.057944 - 21 April 2025
（This article belongs to the Special Issue: Advances in Biorefinery Technologies and Products – 2024)
Abstract Oat husks, a byproduct of oat milling operations with limited economic value, present a promising feedstock for biorefinery processes due to their chemical composition. This study investigates the conversion of C5 carbohydrates in oat husks into furfural through hydrothermal pretreatment using various phosphate-based catalysts, including H₃PO₄, NH₄H₂PO₄, NaH₂PO₄, KH₂PO₄, K₂HPO₄ and K₃PO₄ as catalyst. The catalysts’ effectiveness in promoting furfural production was evaluated under identical hydrothermal conditions (treatment time for 60 min at a constant temperature of 170°C and a catalyst amount). Continuous water steam was used to strip furfural from the reaction zone and minimize its degradation.… More >

Graphic Abstract

View

464

Download

199

Open Access

ARTICLE

Mahdi Mubarok^1,*, Pirda Maharani Nafisah¹, Adi Santoso², Saefudin^2,*, Efrida Basri², Yusuf Sudo Hadi^1,3, Adik Bahanawan², Rohmah Pari², Imam Busyra Abdillah¹, Jingjing Liao⁴, Dede Hermawan¹, Trisna Priadi¹, Philippe Gérardin⁵, Wayan Darmawan¹
Journal of Renewable Materials, Vol.13, No.4, pp. 731-752, 2025, DOI:10.32604/jrm.2024.057476 - 21 April 2025
Abstract Furfurylation, a renowned chemical modification technique, uses furfuryl alcohol to enhance the properties of wood. This technology can be further refined by incorporating renewable tannins, which promote cross-linking with furfuryl alcohol. This study investigates the effects of furfurylation and tannin-modified furfurylation on the physical and mechanical properties of tropical Gmelina wood (Gmelina arborea Roxb.). Experiments involved impregnating Gmelina wood with aqueous solutions of furfuryl alcohol (FA) at 40% and 70% concentrations, as well as FA-tannin combinations (FA 40%-TA and FA 70%-TA), followed by polymerization at 103°C. The results demonstrated that both FA and FA-tannin treatments significantly… More >

Graphic Abstract

View

623

Download

232

Open Access

ARTICLE

Pattaranun Thuadaij, Bualoy Chanpaka^*
Journal of Renewable Materials, Vol.13, No.4, pp. 753-772, 2025, DOI:10.32604/jrm.2025.057590 - 21 April 2025
Abstract Natural rubber (NR) foams are widely used. However, further studies are required for preparing eco-friendly NR foam and determining the optimum physical properties appropriate for application. This study aims to create an NR foam from rubber reinforced with sugarcane bagasse ash (SCBA) and sodium alginate. The results showed that the SCBA was primarily composed of silica or silicon dioxide (87.52% by weight) and carbon (11.41% by weight). This study investigated the influence of the amount of sodium alginate (0–5 phr) used in the NR foam formation. The addition of SCBA on the NR foam affected More >

Graphic Abstract

View

485

Download

140

Open Access

REVIEW

Amelia Hariry¹, Efri Mardawati^1,2,*, Apri Heri Iswanto³, Tati Karliati⁴, Lukmanul Hakim Zaini^5,6,*, Muhammad Adly Rahandi Lubis^2,7
Journal of Renewable Materials, Vol.13, No.4, pp. 773-798, 2025, DOI:10.32604/jrm.2025.058359 - 21 April 2025
Abstract Nanocellulose-based adhesives are gaining attention as a viable alternative to conventional adhesives, offering benefits such as cost-effectiveness and scalability, which make them suitable for various sectors, including cosmetics, pharmaceuticals, biodegradable products, and as reinforcing agents in natural adhesives. This review delves into the current advancements in nanocellulose-based adhesive solutions for sustainable and eco-friendly wood composites, using systematic review methods and bibliometric analysis. Data were collected from the Scopus database, spanning from 2007 to 2024, and visualized using VOSviewer to highlight emerging trends in the field. The analysis revealed that nanocellulose shows great potential as a More >

View

750

Download

282

Open Access

ARTICLE

Johanna Gaitán-Alvarez¹, Róger Moya^1,*, Alexander Berrocal¹, Karla J. Merazzo^1,2,3,4,5
Journal of Renewable Materials, Vol.13, No.4, pp. 799-816, 2025, DOI:10.32604/jrm.2025.058755 - 21 April 2025
（This article belongs to the Special Issue: Modification and Functionalization of Wood)
Abstract The impregnation of nanoparticles magnetified into wood had been developed by different methods, like surface chemical coprecipitation and vacuum-pressure coprecipitation of magnetic nanoparticles (NPs). However, there is a lack of information on the best method to coprecipitation NPs. Then, the present study has the objective to measure the effects of the impregnation process of wood veneers through two in situ processes (immersion and vacuum-pressure) using a solution of FeCl₃·6H₂O, FeCl₂·4H₂O and ammonia in three tropical species (Pinus oocarpa, Vochysia ferruginea and Vochysia guatemalensis). It was measured the degree of synthesis of iron NPs using weight and density gains, Fe⁺³ absorption, emission… More >

Graphic Abstract

View

453

Download

189

Open Access

ARTICLE

Pollawat Charoeythornkhajhornchai, Piyamas Saehia, Thidaporn Butchan, Nawapol Lertumpai, Worawut Muangrat^*
Journal of Renewable Materials, Vol.13, No.4, pp. 817-827, 2025, DOI:10.32604/jrm.2025.02024-0017 - 21 April 2025
Abstract Herein, cure characteristics, morphology, and mechanical properties of natural rubber filled with activated carbon-based materials were investigated. Carbon-based materials were prepared from bagasse, coffee grounds and pineapple crowns by the pyrolysis method at temperatures in the range of 300°C. As-synthesized carbon materials were characterized by optical microscopy (OM), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR) to analyze size distribution, morphology, and functional groups, respectively. OM and SEM analysis revealed that particles, flakes, and a small quantity of fiber-like carbon were obtained using bagasse and pineapple crown as raw materials, while honeycomb-like carbon materials… More >

Graphic Abstract

View

595

Download

239